High and Low Temperature Humidity Chamber
Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according toIEC60068-2-1(GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78,IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber is used to test the CFL/LED which meets IES LM-80-08, electricity products, automative cars, home appications and mobiles.
What is Climate Chamber?
Climate chambers is used to simulate a temperature enviromental condistions, it may also be called environmental chambers or Thermal Chamber or Temperature Chamber
Specifications:
•The temperature humidity test chamber is made of SUS304 Steel. The thermal insulation layer is made of polyurethane hard foam ultra-fine glass fiber. The heat-insulated doorframe uses high temperature aging silicone rubber sealing strip.
•The temperature controller of the climate chamber includes Korean TEMI display in English/Chinese and German Siemens PLC. It can communicate with PC via RS-232. The temperature accuracy is 0.1ºC and humidity accuracy is 0.1%R.H
•The temperature sensor is platinum PT100Ω/MV
•The independant heating system uses nickel-chrome electric heater
•The refrigerating system is fully enclosed air-cooled single-stage compression refrigeration mode, and the compressor is from France TECUMSEH brand which can allow you get after sales support from many other countries
•The circulation system uses temperature resistant and low noise air-conditioned motor and multi-blade centrifugal wind wheel
•The safety protection system includes electric leakage, short circuit, over temperature, motor overheating, compressor pressure, overload, over-current protection
•Working Voltage: AC380V±10% 3phases and frequency 50Hz/60Hz
•Working Environmental: Temperature is 5ºC~+30ºC Humidity ≤85%R.H
| High & Low Temperature Humidity Chamber with Programmable Function (GDJS Series) | |||||
| Model (cm) | GDJS-225* | GDJS-500* | GDJS-010* | GDJS-013* | GDJS-015* |
| Workroom Dimensions | 50x60x75 | 70x80x90 | 100x100x100 | 100x100x130 | 100x100x150 |
| Exterior Dimensions | 105*102*200 | 132*132*217 | 167*152*231 | 217*152*231 | 245*160*231 |
| Work Power | 7.0kW | 13.5kW | 15.0kW | 16.5kW | 16.5kW |
| Temperature Range | A: -20ºC-150ºC B: -40ºC-150ºC C: -60ºC-150ºC D: -70ºC-150ºC | ||||
| Humidity Range | 30%~98% R.H | ||||
| Fluctuation/Evenness | ±0.5ºC/±2ºC | ||||
| Humidity Deviation | -2%~-3% R.H | ||||
| Temperature Rise Speed | 1.0ºC~3.0ºC/min | ||||
| Temperature Down Speed | 0.7ºC~1.0ºC/min | ||||
| High and Low Temperature Chamber with Programmable Function (GDJW Series) | |||||
| Working Room Size | GDJW-225* | GDJW-500* | GDJW-010* | GDJW-013* | GDJW-015* |
| Workroom Dimensions (cm) | 50x60x75 | 70x80x90 | 100x100x100 | 100x100x130 | 100x100x150 |
| Temperature Range | A: -20ºC-150ºC B: -40ºC-150ºC C: -60ºC-150ºC D: -70ºC-150ºC | ||||
| Fluctuation/Evenness | ±0.5ºC/±2ºC | ||||
| Temperature Rise Speed | 1.0ºC~3.0ºC/min | ||||
| Temperature Down Speed | 0.7ºC~1.0ºC/min | ||||
| High Temperature Chamber/Oven Chamber (GW Series) | |||||
| Working Room Size | GW-225 | GW-500 | GW-010 | GW-013 | GW-015 |
| Workroom Dimensions (cm) | 50x60x75 | 70x80x90 | 100x100x100 | 100x100x130 | 100x100x150 |
| Temperature Range | Enviromental Temperature ~150ºC (Option can be max 300ºC) | ||||
| Fluctuation/Evenness | ±0.5ºC/±2ºC | ||||
| Temperature Rise Speed | 1.0ºC~3.0ºC/min | ||||
The * in GDJS-225*/GDJW-225* means the temperature range A: -20ºC-150ºC, B: -40ºC-150ºC, C: -60ºC-150ºC,D: -70ºC-150ºC
How does an environmental chamber work?
The temperature and humidity environmental chamber can simulate a variety of temperature and humidity natural environments, and is suitable for testing electronic devices, household appliances, food, trolleys, vulcanized rubber, plastic rubber, metal materials and other commodities. The whole process of humidification of the temperature and humidityenvironmental chamberis to increase the working pressure of water vapor. The more initial way is to spray water on the test box wall to control the saturation pressure of the water surface according to the operating temperature.
What'sTemperature Chamberquality difference between LISUN and other brands in China Market?
1. LISUN low temperature such as -60ºC warranty under a 200W lamps with heating but other brands under empty conditions.
2. LISUN adopts with Finland brand electronic humidity sensor which no need to maintenence. But our competitor used dry ball device which is easy dry to cause problems after used 3-6months.
3. LISUN equipped a water purification device, customer can use a water pipe connect it to provide water supply directly, our competitor but need to add the water by hand.
4. LISUN temperature chamber key electrical connector parts adopted with famous brand AC contactor and solid state relays fromOmron brands. It is easy for you to find in your local market if they were failed, but our competitors used them with almost Chinese local brands.
在线联系供应商
Other supplier products
 |
Automatic Electrical Safety Tester | The LS9955/LS9956Automatic Safety Test System(electrical safety analyzer) combined the following function in one set: Withstand Voltage Test (AC/DC... |
 |
Lamp Start, Run-up time and Flicker Test | LSRF-3 Lamp start, Run-up time and Light Flickering Analyzer - Flicker Tester is equipped with Class A fast photometric probe, so the sampling spee... |
|
|
High and Low Temperature Humidity Chamber | Temperature Humidity Chamber | Thermal Chamber | Climate Chamber is according toIEC60068-2-1(GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-... |
 |
Waterproof Test Machine for IPX1 to IPX8 | JL-X waterproof test machine is according toIEC60529:1989 +A1:1999 +A2:2013 Degrees of protection provided by enclosures(IP Code),IEC60598, IEC6033... |
 |
CCD Spectroradiometer Integrating Sphere Compact System | LPCE-3 is a CCD Spectroradiometer Integrating Sphere Compact System for LED Testing. It is suitable for single LED and LED luminaires’ photom... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
