Protective Clothing Liquid Resistance Static Pressure Tester
Instrument use:
The acid-proof clothing material anti-seepage acid static acid pressure tester is used to measure the acid-base anti-seepage of breathable acid-base protective clothing materials - static acid pressure resistance and liquid static pressure resistance.
Working principle:
The resistance to liquid static pressure borne by the fabric is used to indicate the resistance encountered by the test liquid through the fabric. Under the atmospheric pressure of 101.325kPa, the bottom of the sample is subjected to a continuously rising liquid pressure. Until there are three leaks, and the height of the liquid column at this time is recorded, which is called the fabric resistance to liquid static pressure.
Technical parameters:
1. Test solution: 80% concentrated sulfuric acid with different concentrations of acid and alkali
2. Rising rate of acid pressure test solution: (60±3) cm/min
3. Maximum pressure: 150mm liquid column "Maximum acid pressure: greater than 150mmH2SO4 (80%)"
4. Range: 0~150mm liquid column "0~150 mmH2SO4 (80%)"
Test preparation:
Take 3 samples from the finished protective clothing with a diameter of 32mm
Test steps:
1. The reagent contacts the sample vertically from below
2. Pressurize the reagent continuously and stably
3. Observe the sample and record the static pressure of the liquid when the third liquid drop appears on the sample
4. Each sample should be tested 3 times, and the arithmetic average is taken to obtain the static pressure value of the sample
在线联系供应商
Other supplier products
 |
Aircraft wire wear testing machine | Applicable standards: GJB17.9, MIL-W-81381A, MIL-T-5438 and ISO R1220, 1491 and other standards Main parameters: 1, sand belt length counting ... |
 |
Elastic fatigue testing machine | Product Introduction: This instrument is used to test the elasticity of elastic belt after reciprocating movement. Product Specifications: 1. ... |
 |
Safety shoe impact testing machine | Product Introduction: According to standards BS-953,1870,EN-344,ANSI-Z41,CSA-Z195 ISO K88782 Weight of drop weight （EN） 20±0.2kg,（BS,ANSI）... |
 |
Wire Cut - through Tester for Ford Automotive Wires | Applicable Standard: Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA Technical Parameters: 1. Sens... |
 |
BS 5852 Combustion Tester | IntroductionBS 5852 combustion test equipment is widely used to test the flame retardant properties in Europe and United States soft furniture. It ... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
