.

VW-1 wire and cable burning tester

VW-1 wire and cable burning tester is suitable for measuring the resistance of wire,

cable or rope to flame horizontal propagation and falling of burning particles, measuring

the resistance of wire or cable insulation burning particles during and after using the test

flame, and measuring the resistance of wire, cable or flexible wire to flame vertical propagation.

Measure resistance of wire, cable or rope to vertical flame propagation and falling of burning

particles. Microcomputer control, high performance, intelligent testing equipment, clear frame,

powerful function, simple operation.

Applicable standards

  UL 2556-2021 "Wire and Cable test Method"

  UL 1581-2020 Safety Standard Reference Standard for Wires, Cables and Cords, sections

1060(vertical flame and FT1 test), 1080(VW-1(vertical specimen) flame test),

1090(horizontal specimen apparatus - wire flame test), 1100(horizontal specimen/FT2

flame test)

Main parameters

  Power supply: AC 220V±10% / 50 —— 60HZ

  Power: 200W

  Thermocouple: 0 —— 1300℃

  Thermocouple diameter: 1mm

  Blowtorch inner diameter: Φ9.5mm

  Combustion gas: 95% methane

  Ignition time: 0 —— 999.9s

  Timing range of continuous burning time: 0 —— 999.9s, accuracy is 0.1S

  Blowtorch Angle: the Angle between 0° and 45° can be adjusted


在线联系供应商

至: 上海千实精密仪器
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Medical Face Mask Pressure Difference Measuring Device
Medical Face Mask Pressure Difference Measuring Device Medical face mask differential pressure tester also called mask breathility tester is to determine the breathability of medical face mask materials...
High temperature vacum friction tester
High temperature vacum friction tester Main uses: High temperature vacuum friction and wear testing machine is mainly used to study the friction and wear characteristics of materials in...
Multilayer geotextile single-layer thickness tester
Multilayer geotextile single-layer thickness tester Scope of application: The multi-layer sample is mechanically separated and the thickness of each single layer of the sample is measured under the ...
oxygen index apparatus
oxygen index apparatus The oxygen index flammability testeris, perhaps, the most economical and precise quality control test of combustible materials. Its ease of use tog...
Random Tumble Pilling Tester
Random Tumble Pilling Tester G227T Random Tumble Pilling Tester-Two-box and four-box can be configured. It is mainly used in evaluating the pilling performance of textiles. The...
供应产品

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 卖方: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A 卖方: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A 卖方: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH 卖方: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S 卖方: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...