.

Strip evenness tester

Product Introduction:

Cotton yarn fiber strip analyzer is a high performance, high test efficiency of textile laboratory instrument, it is used to test the fine yarn, roving, sliver trunk density uneven, analysis of the cause of uneven, suitable for cotton, wool, hemp, chemical fiber short fiber pure spinning and blended yarn strip dry test.

Main parameters:

1. Capacitor detection slot: 4

2. Test range: 4tex —— 80k tex

3. Test speed: 8, 25, 50, 100, 200, 400, 800m/min

4. Test time: 10sec —— 20min can be set arbitrarily

5.CV%, U% value range: 0.2% —— 100%

6. Variation - Length curve: Cutting length 1 cm —— 1000m

7. Output three types of 12-speed defects at the same time:

Details -30%, -40%, -50%, -60%

Coarse section +35%, +50%, +70%, +100%

Cotton knot +140%, +200%, +280%, +400%

8. Spectral diagram: 170 channels, wavelength range 1cm-2000m

9. Linear density frequency distribution: -100% —— +100%, +100% —— +400%

10.DR% value: Output DR(1m, +5%), DR(1m, -5%), DR(20cm, +35%), DR(20cm, -30%) four DR% values

11. Number of batch measurements: ≤20

12. Power supply: AC220V±10%50Hz±5Hz

13. Power consumption ≤400VA


在线联系供应商

至: 上海千实精密仪器
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Solid Auto - ignition Point Tester
Solid Auto - ignition Point Tester Product Introduction This tester determines the self - ignition characteristics of solid chemical products by placing the substances in a 20mm - s...
Gas Oxidizing Property Tester
Gas Oxidizing Property Tester Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylinder Valve Exhaust Ports by Determination of Combu...
Syringe slide performance tester
Syringe slide performance tester Introduction: 5.7-inch (120 x 90) single color LCD touch screen, Chinese menu display. The nominal capacity of the syringe is selected by the ke...
Safety Helmets Impact and Penetration Resistance Tester
Safety Helmets Impact and Penetration Resistance Tester Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact a...
LIFT, IMO Spread of Flame Apparatus
LIFT, IMO Spread of Flame Apparatus Description This machineis designed according to ISO5658-2 standard D andproduction,while meeting the IMO FTP Code Resolution A. 653 (16) and ASTM...
供应产品

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 卖方: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A 卖方: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A 卖方: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH 卖方: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S 卖方: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...