Shoelace anti-siphon tester
Product Introduction:
Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon waterproof performance.
Anti-siphon:
The force phenomenon of the difference in liquid level height is used to draw water from low places to high places. The anti-siphon effect on textiles is similar to the capillary effect. After the fabric touches the water, the water will spread through the fabric and spread to the high places of the fabric.
Waterproof:
Refers to the waterproof agent on the surface of the fabric to form a film, so that water can not penetrate the inside of the fabric is called waterproof.
Anti-siphon can be divided into static anti-siphon and dynamic anti-siphon two categories. Static anti-siphoning is to adopt a static suspension method to observe whether the liquid immersed in the fabric has a climbing phenomenon, and the climbing height to assess whether it is qualified.
Sampling requirements:
1. Leather, mesh: 76*25MM
2. Shoelaces, webbing: 76* width MM
3. Line type: 76* width MM
4. Samples can be tested at the same time: 20
5. Water level height: 450mm
Test requirements:
1. Immersion position: 13MM（0.5 inches）
2. Suspension time: 0.5 hours and 2 hours
在线联系供应商
Other supplier products
 |
Hydrostatic head Tester | Introduction The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water dropl... |
 |
Compression Test device | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by artisans and professionals when judging a fabric' s ... |
 |
Anti-glare Panel Falling Weight Tester | Scope of application: The anti-glare board impact testing machine is designed and produced for each testing unit to measure the impact resistance ... |
 |
Fabric Washing Shrinkage Test Machine | Standards: AATCC 88B, AATCC 88C, AATCC 124. AATCC 130. AATCC 135. AATCC 142. AATCC 143. AATCC 150. AATCC 159. AATCC 172. AATCC 179. AATCC 188 A... |
 |
Protective Clothing Synthetic Blood Penetration meter | Introduction It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressu... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
