Rubber low temperature brittleness testing machine
Product Introduction:
Plastic low temperature embrittlement testing machine is to determine the temperature of rubber and plastic when the sample is damaged by impact under specified conditions, that is, the brittleness temperature, which can make comparative identification of the performance of non-rigid plastics and other elastic materials under low temperature conditions, and the advantages and shortcomings of temperature and low temperature performance. Therefore, both in scientific research materials and production process control are indispensable. This instrument is according to GB/T 15256 and GB/T5470 standard design, the development of compressor refrigeration equipment. The equipment adopts the cascade compressor refrigeration technology, the heat balance principle and the circulation stirring method to achieve automatic uniform cooling and constant temperature of the sample. This equipment is divided into rubber low temperature brittleness testing machine and plastic low temperature brittleness testing machine two kinds.
Technical parameter:
1, temperature control range: -80℃ （room temperature ≤25℃） （there are -60, -70, -80℃ three models for customers to choose）
2, cooling speed:
0 ℃ —— 1.2 ℃ —— 20 ℃ / min
- 20 ℃ —— 1.0 ℃ to 30 ℃ / min
- 30 ℃ —— 0.7 ℃ to 60 ℃ / min
-40℃——-60℃ about 0.7℃/min
-60℃——-80℃ About 0.5℃/min
Note: The use environment is used at room temperature （23-25 ℃）， and the effect of diffusing temperature of the compressor is maintained during work. The side door can be fully opened.
3, after constant temperature, the temperature fluctuation within 3 minutes of the test: < ±0.5℃
4, overall size: 900×505×800mm （length × width × height）
5, the overall size of the studio: 220×170×70mm （length × width × height）
6, cooling medium: ethanol or other non-freezing liquid
7, mixing motor: 15W
8, working power supply 220V——240V,50Hz,2kW
在线联系供应商
Other supplier products
 |
G234 Bed Blanket Flammability Tester | The test instrument is used to detect the flame resistance of the blanket fabric and the flame spread performance of the fabric surface. The test m... |
 |
Quilting Products Combustion Rate Tester | Product details Fire hazards exist everywhere in our daily life. In order to reduce fire accidents due to the flame spread of flammable materials ... |
 |
Electrochemical Corrosion-Wear Combined Tester | Standard ASTM G119: A standard for evaluating synergistic corrosion-wear performance, particularly for biomedical implants in simulated body fluid... |
 |
Geomembrane Texture Height Tester | Scope of application: Suitable for rough surface roughness test of geomembrane. Meet the standard: CJ/T 234- Appendix F-2006. Instrument fe... |
 |
Car seat belt fixed point test bench | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtures and headrests strength requirements and test me... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
