Sublimation Fastness Tester Scorch Tester

Introduction

Sublimation Fastness Tester is used for determination of color fastness performance to hot pressing ironing and dry heating (sublimation) for all kinds of dyeing and printing textile materials and textiles, and it can also be used for the test of textile resistance to chlorine damage, scorch, bleaching yellowing, sublimation color fastness test of disperse dyes, hot water fastness test of reactive dyes, dimensional stability at high temperature, etc.

Application

Printing and dyeing fabrics, textile auxiliary agents, and other areas of the textile and apparel.

Standards

GB/T 5718 Textiles color fastness test. P01: Colour fastness to dry heat (excluding heat pressing)

GB/T 6152 Textiles; tests for colour fastness to hot pressing

JIS L0879 Test methods for colour fastness to dry heat

JIS L0850 Tests for color fastness to hot pressing

ISO 105 P01Textiles; tests for colour fastness; part P01: colour fastness to dry heat (including hot pressing)

ISO 105 X11Textiles; Tests for colour fastness; Part X11 : Colour fastness to hot pressing

AATCC 117 Tests for color fastness to dry heat (no pressing)

AATCC 133 Tests for color fastness to high temperature (hot pressing)

M&S C13 Tests for color fastness to high temperature (hot pressing)

M&S C10 Dimensional stability test

Features

Up and down independent temperature control system, the use of PID temperature control program offers high temperature control accuracy and low heating efficiency; PT 100 temperature sensor configured;

Adjustable hinge connection design allows testing of different thickness materials. Able to ensure uniform pressure and heating distribution while testing thicker materials;

Timer configured is to preset the test time. Test time automatically starts when the upper pressing plate is pressing down. Configure the buzzer prompt to remind the end of the test;

Technical Parameters

Heating plate size	210mm×210mm
Heating plate material	Aluminumplate
Preheating time	custom
Pressure	4kPa±1kPa（fullsize）
Temperature control	Independentheatingupanddown
Temperature heating range	Ambienttemperature-300°C
Temp control stability	±1°C
Temp uniformity	±1°C
Timer	Presettingtime.Upperpressingplatedown,automatictiming
Time-up Alarm	Buzzeralarm
Applicable test	Hotpressing,drypressinganddimensionalstabilitytest
Power supply	220V，50Hz
Dimension	W345mm×D520mm×H320mm
Weight	12kg

Other supplier products

	Sweating Guarded Hotplate/ Thermal Insulation and Moisture Permeability Tester / Fabric Thermal Resistance Tester	Testing Standards:GB/T 11048, ISO 11092, ASTM F1868, ASTM D1518, JIS L1096 Application The Thermal resistance wet resistance tester simulates t...
	Button Impact Machine	Testing Standards: ASTM D5171 Application:Button falling weight impact testeris used to determine the impact resistance of plastic sew-through fl...
	5kN Universal Testing Machine	Standards: 1. Test machine host 1 set, 2. 1 set of test control software, 3. 1 set of data acquisition card, 4. Stepper motor 1 set, 5. Decelera...
	GMA Ultra-filtration Membrane Porometers ISO 4003-1990 ASTM F316-2003	Standards: ASTM F316-2003. ASTM D6767-2002. ASTM E1294-1999. ISO 4003-1990. GB/T 14041.1-2007. HY/T 051-1999. HY/T 064-2002 Applications: Based ...
	Rapid crack growth testing machine	Standard ISO 13477: Designed exclusively for determining critical pressure (Pc) and temperature (Tc) in polyethylene pressure pipes during rapid c...

供应产品

Same products

	PH-2398 pH/EC/ORP/温度 多参数测试仪	卖方: 科立龙电子股份有限公司	大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或...
	ORP-2026S 防水型 土壤ORP&温度 二合一测试仪	卖方: 科立龙电子股份有限公司	范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV...
	防水型 EC /TDS/温度三合一参数测试仪	卖方: 科立龙电子股份有限公司	范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ...
	EC-98330 电导率营养测试棒	卖方: 科立龙电子股份有限公司	本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0...
	PH-808防水笔式土壤PH计	卖方: 科立龙电子股份有限公司	两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保...