Environmental stress cracking testing machine
Standard
ASTM D1693: Exclusively designed for bending beam and constant load tests on polyethylene and other thermoplastics.
ISO 22088-3: Configurable for notched specimen testing in aggressive media.
Product Advantages
1. Unmatched Throughput
460-Sample Capacity: Test up to 460 specimens simultaneously (46 vessels × 10 samples/vessel).
High-Efficiency Design: 40% faster batch testing than competitive models.
2. Precision Engineering
Uniform Stress Application: Compliant with ASTM D1693’s 2.75mm bending beam specification.
PID Temperature Control: ±0.2°C stability across -10°C to 100°C range.
3. User-Centric Workflow
Smart Sample Prep: ASTM-compliant milling tools and prefabricated specimen jigs included.
Intuitive Touchscreen: Pre-loaded ASTM protocols with adjustable hold times (1–1.000 hours).
4. Safety & Compliance
Chemical-Resistant Construction: 316L stainless steel bath and PTFE-coated components.
Audit-Ready Reporting: 21 CFR Part 11 compliant data logging with electronic signatures.
5. Adaptive Testing
Solvent Versatility: Compatible with surfactants (soap), hydrocarbons (oils), and polar solvents (alcohols).
Product Features
Modular Bath System:
46-position carousel with quick-release glass vessels (250mL capacity).
Dual-circuit heating for rapid temperature equilibration.
Stress Loading System:
Manual or motorized bending fixtures with 0–50N load range.
Laser-aligned specimen grips for consistent strain distribution.
Chemical Management:
Integrated solvent level sensors with low-volume alerts.
Vented enclosure for fume extraction (compatible with external HVA systems).
Data Integrity:
100Hz sampling rate captures crack initiation events.
Wireless data export via Wi-Fi/Bluetooth to LIMS platforms.
Safety Suite:
Leak-proof magnetic drive stirrers.
Emergency solvent dump system with CO₂ fire suppression.
Technical Parameters
| Specification | Details |
|---|---|
| Temperature Range | -10°C to 100°C (water/glycol bath) |
| Temperature Accuracy | ±0.2°C (±0.1°C with calibration kit) |
| Sample Capacity | 460 specimens (46 vessels × 10 samples) |
| Stress Load Range | 0–50N (0.1N resolution) |
| Power Supply | 220V/50Hz (110V/60Hz available) |
| Bath Volume | 60L (expandable to 120L) |
| Dimensions (W×D×H) | 1,200mm × 800mm × 1,850mm |
| Weight | 280 kg (net) |
在线联系供应商
Other supplier products
 |
Catheter Residual Vacuum Tester | Catheter Residual Vacuum Tester - Other test instrument - standard Main Uses of the Catheter Residual Vacuum Tester The catheter residual vacuum ... |
 |
Fabric ici pilling and snagging box | Fabric ici pilling and snagging boxis composed of the same speed motor drive, and to maintain the speed of 60rpm. Rotating ring number can be found... |
 |
Hydrostatic Head Test Machine | Standards: AATCC 127 Water Resistance: Hydrostatic Pressure Test ASTM F1670 Standard Test Method for Resistance of Materials Used in Protective ... |
 |
Fabric Fiber Shedding Degree Tester (Friction) | Instrument Testing Principle Lay the specimen flat and fix it on the holder. Make the wet abrasive attached to the friction head perform reciproca... |
 |
Seat Bumping and Creep Test Bench | Content This test bench is used for simulating the car seat bumping and creep situation when a car is running. This instrument can perform car sea... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
