Photovoltaic module outdoor exposure test system
Standard
- IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
- IEC 61730: Photovoltaic (PV) Module Safety Qualification
- UL 61730: Safety Standard for Photovoltaic Modules
- ISO 9060: Solar Energy – Classification of Pyranometers
- CE Certification(Conformité Européenne)
Product Advantages
- Real-World Accelerated Aging
- 10–15 Year Equivalence: Achieves IEC 61215 damp heat/UV exposure in 6 months.
- Spectral Matching: AM1.5G filter for standardized terrestrial solar simulation.
- Multi-Environment Testing
- -40°C to +85°C Chamber: Replicates desert heat to polar cold with ±1°C stability.
- 95% RH Humidity Control: Tests PID resistance in tropical/marine environments.
- Energy Harvesting
- Grid-Tied Design: Offsets 70% of power consumption via test module output.
- MPPT Tracking: Optimizes energy extraction during standby periods.
- Smart Data Acquisition
- 16-Channel Logging: I-V curves, EL imaging, and thermal mapping in real-time.
- AI-Powered Diagnostics: Predicts degradation modes (delamination, hotspots) via ML.
- Safety First
- Arc-Fault Detection: UL 1699B-compliant for DC side protection.
- Emergency Shutoff: Dual redundant safety circuits with GPS-enabled alerts.
Product Features
- Dual-Axis Tracker: ±60° tilt, ±180° azimuth for precise solar alignment.
- 10” Sunlight-Readable HMI: Preloaded IEC/UL test sequences with customizable dwell times.
- Remote Monitoring: 4G/LTE connectivity with SMS/ alerts.
- Self-Cleaning System: Automated rain simulation for dust accumulation studies.
- Modular Design: Expandable from 5 kW to 50 kW for pilot-scale testing.
Technical Parameters
| Parameter | Specification |
|---|---|
| Solar Irradiance | 300–1,200 W/m² (AM1.5G filtered) |
| Temperature Range | -40°C to +85°C (operational) |
| Temperature Deviation | ≤±1°C (at steady state) |
| Humidity Range | 10%–95% RH (non-condensing) |
| Chamber Volume | 2m × 3m × 2.5m (W×D×H, expandable) |
| Power Supply | 380V/415V 3-phase, 50/60Hz |
| Dimensions | 2,500mm (W) × 3,500mm (D) × 3,000mm (H) |
| Weight | 1,200 kg (net) / 1,800 kg (gross) |
Accessories Included
- Testing Kit:
- 4x IEC 60904-4 compliant reference cells.
- 10x Type T thermocouples with ceramic insulation.
- Software Suite:
- License key forSolarTest Pro(Windows/Linux).
- 1-year free access to cloud-based PV simulation tools.
- Calibration & Safety:
- NIST-traceable irradiance meter.
- Arc-flash protective gear (Class 2, 3 pairs).
- Maintenance Kit:
- Spare fuses and surge protectors.
- Chamber cleaning solution (non-corrosive).
- Documentation:
- Multilingual quick-start guide (printed + digital).
- Compliance certificates for IEC/UL/ISO standards
在线联系供应商
Other supplier products
 |
Pipes Hydrostatic Testing Machine/ Pipeline Pressure Resistance Tester / Pipe Burst Pressure Tester | Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of p... |
 |
Battery Powder Compaction Density Measurement System | Standard Engineered to comply with global testing standards (ISO 3953.ASTM B527), our Powder Tapped Density Analyzer provides certified results fo... |
 |
Protective Clothing Flame Spread Test Machine | Introduction: Protective clothing flame spread testeris designed and manufactured according to the stan-dard of ISO 15025 protective clothing bu... |
 |
Flat End Type of Thread EndSuction Machine | lt is applicable to clean up thread endand fibre dust (no static electricity) cutdown from garment. Function and features The machine is mini and... |
 |
Electric bicycle chassis dynamometer system | System overview: The whole electric bicycle chassis power measurement system fully meets the national standard GB17761-2024 "Safety Technical Spec... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
