Helmets Vertical SpacingInfrared - positioning Tester
Purpose
This measuring instrument is used to measure the vertical spacing and wearing height of safety helmets.
Applicable Standard
GB/T 2812-2006
GB 2811-2019
Technical Parameters
1. Digital height gauge, which can display the height in real - time, with a measuring range of 0 - 500mm.
2. Adopts infrared positioning.
3. First, wear the test sample on the standard - specified head mold according to the standard requirements, and adjust it to make the heights on both sides of the hat hoop consistent.
4. Measure the vertical distance from the lowest point of the bottom edge of the hat hoop on the side of the sample to the top of the head mold as the wearing height, record the measured value and be accurate to 1mm.
5. Measure the vertical distance from the position of the point on the edge of the minor axis of the helmet shell relative to the head mold to the top of the helmet shell as X1.
6. Remove the wearing system and cushioning liners, place the sample on the head mold again, and ensure that the posture of the helmet shell is the same as before removal.
7. Measure the vertical distance between the same points as X2.
在线联系供应商
Other supplier products
 |
Helmet UV pretreatment box | Helmet UV pretreatment box - Other test instrument - standard Standards: Applications: Product Information: Product Introduction:... |
 |
Anti Synthetic blood penetration tester | Standards: ASTM F1670； ASTM F1671； ASTM F903； ISO 16603； ISO 16604； GB 19082； YY/T 0689； YY/T 0700； Applications: It is applicable to the ... |
 |
Glove Cut Resistance Tester | Product Introduction: The machine is used to test the cutting resistance of gloves. Under the specified load, the blade cuts the sample to measure... |
 |
Mercury Lamp Insolation Aging Tester | Introduction Mercury lamp insolation aging tester includes light bulb, test chamber, sample clip, cutting template, centering device, timer, lamp ... |
 |
Wire Torsion and Winding Tester | Product Introduction: Metal wire twisting and winding machine is widely used in aerospace, metal material processing, tire manufacturing and other... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
