Timken extreme pressure friction testing machine
Main uses:
Alemken extreme pressure friction testing machine is mainly used to evaluate the extreme pressure performance and abrasion resistance of various tear oil and grease, etc. Its specific uses include but are not limited to:
Evaluating the extreme pressure bearing capacity of lubricating media: The Timken testing machine can evaluate the bearing capacity of lubricating media such as lubricating oil and grease under extreme conditions by simulating the friction and wear process under extreme pressure conditions. This is of great significance to the research and specification of industrial oils and fats.
Distinguish the performance of EP additives: Through the test of Timken testing machine, it is possible to distinguish the low, medium and high extreme pressure performance of different EP(extreme pressure) additives, which provides a scientific basis for the optimization of lubricant formulation.
Material properties research: In addition to lubricating media, Timken testing machine can also be used for a variety of coatings, coatings, metal, non-metal and other materials performance research, especially their wear resistance and friction coefficient.
Applicable standards:
Timken extreme pressure friction testing machines are usually tested in accordance with the following standards and specifications:
ASTM D2509: This is a standard developed by the American Society for Materials and Testing (ASTM) to evaluate the performance of lubricants and lipids under extreme pressure conditions. The test methods and results evaluation of Timken testing machines shall be carried out in accordance with this standard.
ASTM D2782: Also developed by ASTM to evaluate the performance of certain types of lubricants under extreme pressure conditions.
Other relevant standards; Depending on the specific application area and test requirements, other relevant standards and specifications may also be involved. For example, in China, the testing of the Timken testing machine may also require compliance with relevant national standards such as GBT or industry standards.
In addition, different types of Timken testing machines may have different technical parameters and scope of application, so before testing, you should carefully read the equipment manual to understand the specific performance and test requirements of the equipment to ensure the accuracy and reliability of the test results.
Technical data:
Test load 10.000 N
Automatic loading 0.9 to 1.3 kg/s (pneumatic)
Speed 1 - 800 rpm, variable
Temperature up to 120°C
Grease feeder 45 g/min
Feeder 3.8 liters (circulation pump and heater)
Test sample (block) 123 mm x 123 mm x 123 mm
Test sample (ring 12 mm x 12 mm x 12 mm (diameter) x 12 mm (width)
在线联系供应商
Other supplier products
 |
Fabric Friction Charging Charge Tester | Standards: JIS L-1094; JIS T-8118; ZB W 04008-89; GB / T12703.2-2009; GB 12014-2009; GB / T23316-2009 Applications: Friction Charging Test... |
 |
Sole heat resistance testing machine | Main uses: The sole heat resistance tester is used to test the heat resistance and temperature insulation performance of finished shoes under high... |
 |
Powder Wet Vibrating Screen System For Lithium Battery Material Testing | Standard ASTM E11: Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves ISO 3310-1: Test Sieves – Technical Requirements ... |
 |
Automatic Reaction Calorimeter | Product Features： 1. It offers three calorimetry methods: heat - flow, power - compensation, and reflux, allowing users to choose according to the... |
 |
Medical Mask Differential Pressure Tester YY 0469-2011 YY/T0969-2013 | Standards: YY 0469-2011 YY/T0969-2013 EN 14683:2014 Annex C ASTM F2100 Product Information: Medical Mask Differential Pressure Tester also calle... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
