Bone Cement Four-Point Bending Fatigue Tester
Standard
- YY/T 1429 (China): Specifies four-point bending fatigue tests for acrylic resin bone cements under quasi-static and cyclic loading.
- ISO 16402 (International): Defines protocols for determining the fatigue life of bone cements in simulated physiological environments.
- Additional alignment with ASTM F2118 for constant load fatigue testing of polymer-based bone cements.
Product Advantages
- Dual-Environment Testing: Integrated water bath chamber (37°C ±0.5°C) simulates in-vivo conditions for clinically relevant data.
- Precision Fatigue Analysis: 0.01Hz–50Hz frequency range captures both low-cycle and high-cycle fatigue behavior.
- Automated SOP Execution: Pre-loaded test protocols for YY/T 1429 and ISO 16402 ensure regulatory compliance.
- Real-Time Fatigue Monitoring: Live S-N curve plotting and crack propagation detection via acoustic emission sensors.
- Modular Specimen Clamping: Quick-release fixtures accommodate rectangular beam specimens (2×4×30mm to 6×12×60mm).
- Data Integrity: Blockchain-timestamped results prevent tampering and simplify audit processes.
Product Features
- Four-Point Bending Configuration: 30–100mm span adjustable for standardized (ISO) or custom specimen geometries.
- Electrohydraulic Actuator: Delivers sinusoidal, square, or random vibration waveforms up to 1kN force.
- Thermostatic Water Bath: Dual-zone temperature control (15–50°C) with anti-evaporation lid system.
- High-Speed Data Acquisition: 16-bit resolution at 10kHz sampling rate captures transient failure events.
- AI-Assisted Analytics: Machine learning algorithms predict fatigue life from partial test data.
- Safety Interlock System: Emergency stop, over-temperature protection, and breakaway specimen holders.
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Dynamic Force | ±1,000 N (axial) |
| Frequency Range | 0.01–50 Hz (sinusoidal/square wave) |
| Temperature Control | 15–50°C ±0.5°C (water bath) |
| Force Resolution | 0.01 N (0–100N); 0.1 N (100–1,000N) |
| Displacement Range | ±5 mm (0.1 μm resolution) |
| Test Span Adjustability | 30–100 mm (ISO-compliant presets) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 800W |
| Dimensions (W×D×H) | 900 × 700 × 1,600 mm |
| Weight | 320 kg (including water bath) |
| Noise Level | <65 dB (A-weighted) |
Accessories
- Four-Point Bending Fixture Kit:
- Anodized aluminum load frames with laser-marked span indicators
- Self-aligning specimen grips (2–6mm thickness compatibility)
- Thermostatic Water Bath:
- 10L capacity with recirculation pump for temperature uniformity
- Corrosion-resistant stainless steel construction
- FatigueMaster Pro Software:
- Automated S-N curve generation
- Crack initiation detection (acoustic emission integration)
- 21 CFR Part 11-compliant audit trail
- Operator Kit:
- Calibrated micrometer set (0–25mm)
- Specimen preparation templates (ISO 16402 compliant)
- Calibration Bundle:
- NIST-traceable force calibration weights
- Temperature verification thermocouple
在线联系供应商
Other supplier products
 |
PV Backsheet Abrasion Tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 1703: Flat-Plate Photovoltaic Modules a... |
 |
Catheter Leakage and Compliance Tester | Catheter Residual Vacuum Tester - Other test instrument - standard Main Uses of the Catheter Leakage and Compliance Tester The catheter leakage a... |
 |
Fire stability tester for paper gypsum board | Fire stability tester for paper gypsum board - Other test instrument - standard Product Information: Technical parameters: 1, combustion tempera... |
 |
Shoe Lace and Eyelet Abrasion Tester | Main uses: The shoelace eye wear testing machine is mainly used to test the wear resistance of shoelace and shoe eye under repeated friction. The ... |
 |
Electric pencil hardness tester | Product Introduction: This machine is suitable for all kinds of finished product spray hardness test, such as: mobile shell, laptop computer shel... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
