Intramedullary Nails Internal - fixation Pull - out Force Tester
Standard
- ASTM F543: Standard specification for metallic medical bone screws (dynamic loading protocols).
- ISO 12172: Implants for surgery—Partial and total hip joint prostheses (fatigue testing methodologies).
- YY/T 0342: Chinese standard for surgical implant testing (cutout resistance evaluation).
- Adaptive Compliance: Customizable protocols for emerging regulatory frameworks.
Product Advantages
- Dynamic Load Simulation: Replicates physiological gait-cycle forces (0–1,500 N at 5 Hz) for real-world failure prediction.
- Dual-Axis Measurement: Simultaneous tracking of cutout force (N) and angular displacement (°) during cyclic testing.
- Failure Prediction Algorithm: Proprietary software identifies pre-failure indicators using machine learning.
- High-Speed Imaging Integration: Syncs with external cameras for real-time deformation visualization (optional upgrade).
- Ergonomic Workflow: Touchscreen interface with pre-loaded ASTM/ISO templates and customizable test sequences.
- Modular Design: Quick-swap fixtures for testing various nail designs (helical blades, lag screws, etc.).
Product Features
- Electrodynamic Actuator: Delivers sinusoidal, triangular, or custom waveforms up to 10 Hz.
- 6-DoF Load Cell: Measures axial/torsional forces and moments with 0.1% FS accuracy.
- High-Resolution Motion System: ±5° angular resolution for tracking nail migration paths.
- Thermal Stability Chamber: Controls test environment (-20°C to +50°C) for material property analysis.
- AI-Powered Analytics: Auto-generates failure mode maps comparing historical/current implant designs.
- Remote Access: Cloud-connected system for real-time collaboration and audit trails.
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Dynamic Load | ±1,500 N (axial) / ±50 Nm (torsional) |
| Frequency Range | 0.1–10 Hz (sinusoidal) |
| Angle Measurement | ±5° (0.001° resolution) |
| Data Sampling Rate | 10 kHz (synchronized across 8 channels) |
| Test Duration | 1–10⁶ cycles (programmable) |
| Sample Compatibility | 8–16 mm diameter nails, 100–500 mm length |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 1,200W |
| Dimensions (W×D×H) | 1,200 × 800 × 1,800 mm |
| Weight | 450 kg (including safety enclosure) |
Accessories
- Dynamic Test Fixture Kit:
- Self-centering bone analog holder
- Adjustable nail insertion guide (0–45° varus/valgus)
- 6-Channel Load Cell: Calibrated to ISO 376 standards.
- TestMaster Pro Software:
- Real-time hysteresis loop visualization
- Fatigue life prediction (S-N curve generation)
- 21 CFR Part 11 compliance module
- Safety Enclosure: Acrylic chamber with interlock system and LED lighting.
- Calibration Bundle:
- NIST-traceable weights (100g–1kg)
- Angular verification jig
- Operator Kit:
- Torque wrench set (0.1–10 Nm)
- Sterilizable bone cement spatulas
- ISO international standards: The design, manufacturing, and testing process of the equipment should meet the requirements of ISO international standards to ensure the international recognition of the test results.
- National/regional standards: Different countries and regions may formulate specific standards for the mechanical property testing of orthopedic implants. When conducting tests, appropriate national/regional standards should be selected according to the actual situation.
- Industry standards: The orthopedic implant industry may also have formulated relevant testing standards and specifications internally. These standards may include provisions on testing methods, testing conditions, testing equipment, etc.
在线联系供应商
Other supplier products
 |
Dental Implants Static Torsion Testing Machine | Standard ISO 13498: Specifies static torsion testing protocols for dental implants, including torque application rates, failure criteria, and da... |
 |
Face Mask Filtration Efficiency Tester | Meet the standard: ASTM F2100 ASTM F2299 EN 149 NIOSH 42 CFR Part 84 ISO 16900-3 YY 0469 YY/T 0617 Product Introduction: The primary function... |
 |
Particle Abrasion Tester | The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate ... |
 |
Tabletop Light Fastness Tester AATCC 16 BS 1006 UK/TN | Standards: AATCC 16.BS 1006 UK/TN Applications: Tabletop Light Fastness Tester is a powerful xenon instrument with affordable price for conducti... |
 |
Digital display electronic ink viscosity meter | Standard: ISO 12644 How it works: The working principle of the digital display electronic ink viscosity meter is based on two tin （usually a met... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
