Oil Filter Hydrostatic Breakage Tester
Meet the standard:
ISO 2941
SAE J1858
Product Introduction:
The Oil Filter Hydrostatic Breakage Tester operates by using a liquid medium (typically hydraulic oil or a specified test fluid) to apply pressure to the filter component under evaluation. The test can be configured to assess different failure modes:
Filter Element Collapse/Burst: The filter element is placed in a test fixture, and a differential pressure is applied across the filter media from the outside-in (collapse) or inside-out (burst). The pressure is steadily increased at a controlled rate until the element's structure fails (e.g., pleat collapse, seam rupture, end cap separation).
Filter Housing Burst: The filter housing is subjected to increasing internal hydrostatic pressure until it ruptures or permanently deforms beyond acceptable limits.
A high-pressure hydraulic pump or pressure source is used to generate the test pressure. The pressure is monitored by a transducer and typically displayed digitally. A failure detection system identifies when the structural integrity is compromised, often marked by a sudden pressure drop, audible event, or visual observation, and the maximum pressure reached is recorded as the collapse, burst, or rupture pressure. This test is a critical part of filter qualification and quality control processes to ensure filters meet their specified pressure ratings and can safely operate within a given system.
The instrument is used for:
Determining the collapse or burst pressure rating of filter elements.
Verifying the burst pressure rating of filter housings.
Quality control during the manufacturing of filter elements and housings.
Evaluating the structural effects of material changes or design modifications on filter integrity.
Investigating structural failures of filters from field use.
Ensuring compliance with relevant industry standards and OEM specifications for filter strength.
Product Advantages:
Provides objective, quantitative data on the structural limits of oil filters under pressure.
Directly verifies the collapse, burst, or rupture pressure rating of filter elements and housings.
Essential for preventing catastrophic filter failures in hydraulic and lubrication systems.
Helps ensure the safety and reliability of equipment by confirming filter structural integrity.
Standard compliant test methods are widely available and recognized (ISO 2941 is a key standard).
Allows for controlled and repeatable testing under defined conditions.
Crucial for quality control and design validation processes.
Product Features:
High-pressure hydraulic power unit (pump) or pressure source capable of generating pressures up to the maximum required test pressure.
Pressure control system to increase the test pressure at a precise, controlled rate as specified by test standards.
Robust test stand or fixture designed to securely hold the filter element (for collapse/burst tests) or the filter housing (for burst tests) and withstand the applied pressure.
High-accuracy pressure transducer to measure the applied hydrostatic pressure.
Failure detection system that automatically identifies when the filter structure fails and records the pressure at failure. This may involve monitoring pressure drop, using acoustic sensors, or relying on visual confirmation in some cases (though automation is preferred for accuracy).
Safety enclosure or shielding constructed from strong materials to contain test fluid and debris in the event of a violent rupture.
Digital display showing the applied pressure, pressure rate, and the recorded failure pressure.
Controls for starting, stopping, and pausing the test.
System for filling the filter or housing with the test fluid and purging air.
Main parameters:
1. System pressure gauge range: 30bar
2. Use of working medium: SAE5W engine oil
3. Pressure rise accuracy: 0.5bar/times incremental point
4. Measuring temperature range: room temperature
5. Protective cover: transparent
在线联系供应商
Other supplier products
 |
Battery diaphragm permeability tester | Meet the standard: GB/T458, ISO536/2, QB/T1667, GB/T23227, ISO2965, YC/T172, GB/T12655, S05636/3, IS05636/5, GB/T20042.7-2014, GB/T36363-2018, ... |
 |
Safety Helmet Chin-strap Strength Tester/ Chin strap tensile tester / helmet chin strap tester | Standard GB/T 2812-2006: Safety Helmets GB/T 2811-2019: Head Protection – Vocabulary and Test Methods Equivalent Compliance: ISO/EN 397 ... |
 |
Carpet Static Load Tester | Instrument Features - Simulate the imprints caused by furniture - Meet international standard requirements - Combine the static load tester wit... |
 |
Seat Bumping and Creep Test Bench | Content This test bench is used for simulating the car seat bumping and creep situation when a car is running. This instrument can perform car sea... |
 |
E-bike chassis dynamometer testing machine | Meet the standard: EN 15194 ISO 4210 UL 2849 Product Introduction: Electric bicycles are complex systems involving mechanical, electrical, a... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
