Filter Flow Resistance Tester
Meet the standard:
ISO 3968
SAE J806
Product Introduction:
The Filter Flow Resistance Tester operates by circulating a test fluid (such as hydraulic oil, lubrication oil, fuel, water, or air, depending on the filter's intended application) through the filter element or complete filter assembly under test. A variable speed pump or flow control valve is used to establish and control a range of flow rates through the filter. Pressure sensors or transducers are strategically placed immediately upstream and downstream of the filter to measure the pressure on both sides. The difference between these two pressure readings is the pressure drop across the filter at that specific flow rate. The tester systematically measures the pressure drop at multiple flow rates across the filter's operating range.
The instrument is used for:
Determining the clean filter pressure drop versus flow rate characteristics of filter elements and assemblies.
Comparing the flow resistance of different filter designs, media, and manufacturers.
Selecting filters based on acceptable pressure drop limits for a given system flow rate.
Validating filter specifications provided by manufacturers.
Optimizing hydraulic or lubrication system design to minimize energy losses due to filtration.
Quality control during filter production to ensure consistent flow characteristics.
Research and development of new filter media and designs with lower flow resistance.
Product Advantages:
Provides objective, quantitative data on a filter's resistance to fluid flow when clean.
Essential for accurate filter selection and system design based on pressure drop limitations.
Helps optimize system energy efficiency by characterizing pressure losses across the filter.
Standard compliant test methods (ISO 3968 is a key standard) ensure comparable and reliable results.
Product Features:
Based on typical Filter Flow Resistance Testers:
Test fluid reservoir.
Variable flow rate pump or flow control system capable of generating and maintaining stable flow rates through the filter over a specified range.
Filter housing or fixture designed to securely hold the filter element or complete filter assembly under test, with connections for upstream and downstream pressure measurement.
Pressure transducers or sensors located upstream and downstream of the filter to measure pressures.
Differential pressure transducer (often included) to directly measure the pressure drop across the filter.
Flow meter to accurately measure the test fluid flow rate.
Temperature control system for the test fluid to ensure testing is performed at a consistent and relevant temperature, as viscosity affects pressure drop.
Main parameters:
1. System pressure gauge range: 30bar
2. Use of working medium: SAE5W engine oil
3. Pressure rise accuracy: 0.5bar/sub-increment point
4. Measuring temperature range: room temperature
5. Protective cover: transparent
在线联系供应商
Other supplier products
 |
Spinal Pedicle Screw-Rod System Compressive Fatigue Testing Machine | Standard YY/T 0857-2011 (China): Specifies compression fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, fr... |
 |
Hot Pressing Sublimation Colorfastness Tester | Standards: GB/T 5718 Textiles color fastness test. P01: Colour fastness to dry heat (excluding heat pressing) GB/T 6152 Textiles; tests for colo... |
 |
Double Plate Thermal Conductivity Apparatus | Standards: GB/T 10294-2008 ?Determination of Steady State Thermal Resistance and Related Properties of Thermal Insulation Materials GB/T 3399-19... |
 |
Mechanical load testing machine for photovoltaic modules | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photovo... |
 |
DeMessia zigzag tester | Compliance Standards IEC 60695-2-1 (Fire hazard testing) ISO 6722 (Road vehicles - 60 V and 600 V single-core cables) ASTM D5422 (Standard Test ... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
