Hydraulic Pump Contamination Resistance Tester
Hydraulic pump pollution resistance test bench is mainly used to detect the fuel pump in the specified concentration of pollution in the operating medium when the fuel pump to withstand the characteristics of pollution.
Test Object:
Fuel Pump
Test Item:
Fuel Pump Pollution Resistance Test
Technical Parameters:
1. Test oil: RP-3 aviation kerosene
2. Test powder: in accordance with the provisions of Table II of GJB.1003.1996.
3. Medium temperature: 10-40 ° C
4. Purification cleanliness: -/12/10 (GB/T
5. Test flow: 150 ~ 750L / min (fuel pump J / RLB-160; fuel pump J / RLB155-011); 250 ~ 1150L / min (fuel pump J / RLB-162).
6. Test pressure: 0 ~ 1MPa
7. Fuel tank volume: 1000L
8. Equipment power supply: AC 380V / 50Hz
9. Equipment power: 25kW
10. External dimensions: 5000 × 200 × 2000 (L × W × H) (subject to measurement)
11. Weight: 1000kg
Range of variation of instrument accuracy and test conditions:
1. Pressure kPa: 0.5% FS
2. Flow rate L/min: 0.5%FS
3.Temperature ℃: Class A
Main structure description:
(1) Stirring oil tank, working oil tank with conical oil tank, stirring oil tank installed inside the agitator
(2) Circulation pump circulates stirring and cooling; oil is discharged from the working oil tank.
(3) Bypass circulation purification
(4) pump casing fixed in the working tank box, the working tank box below the installation of the oil plate
(5) two sets of flow measurement devices through the manual switching valve conversion
在线联系供应商
Other supplier products
 |
Deval abrasion testing machine | Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion rate test, suitable for European standards, French standar... |
 |
Solid Auto - ignition Point Tester/ Solid Material Autoignition Tester/ Self-Ignition Point Tester | Product Introduction This tester determines the self - ignition characteristics of solid chemical products by placing the substances in a 20mm - s... |
 |
Particle Abrasion Tester | The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate ... |
 |
Puncture Resistance Testing Machine for Goggles | Standards: ECE R22.05, EN1077 Applications: Make a sharp - edged object of a certain weight fall from a height specified in the standard a... |
 |
Large-size Brushing Machine | lt is applicable to the industries such ashome textiles, carpet and rugs etc. Main technical parameters Power voltage:AC380V50Hz±10% Fan ... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
