Filter Dynamic Cycling Tester
Production:
Filter element dynamic cycling test bench is mainly used to test the chemical element precipitation characteristics of filter element under long-term dynamic cycling. It adopts touch screen operation mode, combined with PLC control, according to the setting
line, and can analyze and judge the abnormal state in the test process and send out alarm information. Manual interval sampling and analysis.
The test bench consists of four parts: test cycle system, real-time temperature control system, electrical control system and test bench frame.
1. Test circulation system
The test circulation system adopts variable frequency pumping unit, which runs automatically by setting the flow rate. System configuration: a test tank, a set of temperature control system, two sets of independent heaters; a set of bypass net
pressure regulator; a set of agitators.
2. Real-time temperature control system
test bench design heating device to ensure that the temperature requirements of the test system, temperature control range of 80 ± 2 ℃ range.
3. Electrical control system
Electrical control system mainly consists of hardware, software, two major systems, the system hardware are selected from well-known brands in the industry, applicable to a wide range of working conditions, reliable operation. The control mode adopts
PLC control, with good human-computer interaction interface, simple operation, stable operation and many other advantages.
4. Test bench frame
The test bench frame design adopts high-strength industrial aluminum frame structure, which has many advantages such as light weight, high strength and beautiful appearance.
Technical indicators:
1. Test medium: water containing boron, and containing lithium hydroxide
2. Test flow: 2-10 m³/h working point 5.7
3. Rated pressure: 0.8 MPa
4. Test cartridge differential pressure: 0. 4MPa
5. Maximum working temperature: 80 ℃
6. Test tank volume: 2000L
7. Maximum cartridge size: 2.5 inches × 60cm (diameter × height cm) to provide a set of equipment
8. Test bench power: 22kw
9. Test bench power supply: three-phase five-wire AC380V / 50Hz
在线联系供应商
Other supplier products
 |
Shoelace anti-siphon tester | Product Introduction: Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon wate... |
 |
Scott Flex Tester | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance of leather, leather and woven materials. One end o... |
 |
Spinal Internal Fixation System Component Testing Machine | Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and conn... |
 |
Needle Flame Tester | Needle Flame Tester - Flammability Testing equipment price quotation - standard Standards: GB / T 4207-84, IEC 6112, ASTM D3638, DIN 53480 and ... |
 |
Spinal Internal Fixation Components System Tester | Standard YY/T 0961-2014 (China): Specifies static/fatigue testing protocols for spinal fixation systems, including connection integrity and anti... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
