Plastic ball indentation hardness tester
Meet the standard:
ISO 2039-1
Product Introduction:
The hardness of plastics is a fundamental property that influences their performance, durability, and suitability for various applications, from consumer goods to industrial components.
Indentation hardness, specifically measured by the ball indentation method, provides a valuable metric for assessing a plastic's resistance to local deformation and its elastic recovery characteristics.
This Plastic Ball Indentation Hardness Tester is designed to accurately perform tests according to recognized international standards, such as ISO 2039-1. The testing process involves applying an initial preload (9.8 N) to set a reference point, followed by a specific test load (selectable from 49N, 132N, 358N, 961N) for a defined period (10-90 seconds). The instrument utilizes hardened steel ball indenters of specified diameters (5mm and an optional 10mm) to press into the surface of the plastic sample. The indentation depth is precisely measured with a high resolution of 0.001mm, allowing for accurate calculation of the material's indentation hardness value.
The instrument is used in laboratories for:
Determining the ball indentation hardness of various plastic materials.
Assessing the resistance of plastics to permanent deformation under load.
Evaluating the hardness characteristics of rigid and semi-rigid plastics.
Quality control of plastic raw materials and finished products.
Research and development of new plastic formulations with specific hardness requirements.
Ensuring compliance with international standards for plastic hardness testing.
Material selection based on hardness properties for specific applications.
Product Advantages:
Complies fully with ISO 2039-1. the primary international standard for plastic ball indentation hardness.
Offers a versatile range of test loads (49N, 132N, 358N, 961N) with a standard initial load (9.8N).
Supports common indenter diameters (5mm standard, 10mm optional) for broad applicability.
Provides high precision with an indentation depth resolution of 0.001mm.
Allows for adjustable test durations (10-90 seconds) to meet specific standard requirements.
Designed for reliable and repeatable hardness measurements on plastic samples.
Essential for quality control, R&D, and compliance in the plastics industry.
Technical parameters:
1. Initial load: ball indentation :9.8N
2. Test load: ball indentation :49N, 132N, 358N, 961N
3. Indenter diameter: Ball indentation: medium 5mm, medium 10mm（optional）
4. Sample height :4mm
5. Indentation depth indicates small indexing value :0.001mm
6. Timing range :10-90S
在线联系供应商
Other supplier products
 |
Paper water absorption tester | Product Information: Paper water absorption tester, also known as Kleim test instrument, is suitable for the determination of the capillary suctio... |
 |
Safety shoe voltage tester | Product Information: The safety shoe voltage resistance tester is mainly used to test the voltage resistance of safety shoes under specified condi... |
 |
KES - SE Friction Sensation Tester | Content TheFriction Tester analyzes hand movements-particularly, strokes-performed by artisans and professionals when judging a fabric’s tex... |
 |
Shoe Heel Impact Fatigue Tester | Main uses: Heel impact fatigue testing machine is mainly used to test the continuous impact tolerance index of women's high heels, mid-heels and o... |
 |
High temperature vacum friction & wear tester | Main uses: High temperature vacuum friction and wear testing machine is mainly used to study the friction and wear characteristics of materials in... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
