Nonwovens Synthetic Blood Penetration Tester
Introduction:
Synthetic Blood Penetration Resistance Tester is developed for ranking the synthetic blood penetration resistance performance of medical face masks in a manner representing actual use as might occur when the face mask is contacted by a high velocity stream of blood from the punctured wound.
This test is required by ASTM F2100 and is tested in compliance with ASTM F1862. ASTM F2100. EN 14683. and ISO 26609.
Applicable Standards：
ASTM F1670;
ASTM F1671;
ASTM F903;
ISO 16603;
ISO 16604;
GB 19082;
YY/T 0689;
YY/T 0700;
Synthetic Blood Penetration Testerworking principle:
Under constant pressure, the synthetic blood was tested on the protective clothing material, and the penetration of blood was synthesized on the visual inspection material.
Sample preparation:
In the sample of each protective suit, 3 pieces (75*75) mm are randomly selected. When conducting the experiment on the composite or multi-layer materials, the edges should be sealed and the diameter shoud be kepted greater than 57mm for testing.
Instrument characteristics:
1. The instrument adopts the air source which can provide (0.5---30 + 0.1)kPa pressure to continuously pressurize the sample, and is not subject to the space limitation of the test site;
2. The range of air pressure can be set freely and set range (0.5---30)kPa;
3. Color touch screen display, Chinese and English operation menu, user can freely choose the language operation;
4. The sample surface is made of imported special aluminum profiles, with light material, smooth surface and never rust;
5. The instrument adopts imported special aluminum drawing panel with metal buttons;
6. The instrument is equipped with a sample automatic clamping device without manual clamping;
7. The test tank is equipped with special fixed device to facilitate customer operation;
在线联系供应商
Other supplier products
 |
Carpet Dimensional Stability Tester | Standard ASTM D5417(Standard Test Method for Assessing Carpet Dimensional Stability) ISO 2551(Textile Floor Coverings - Determination of Dimens... |
 |
KES - G5 Compression Tester | Content The Compression Tester analyzes hand movements-particularly, movements by finger-performed by artisans and professionals when judging a ... |
 |
KES - FB2 - L Large - scale Bending Tester | Content TheLarge Bending Tester accurately and quickly measures factors related to curvatures in small bending moments (bending hardness and recov... |
 |
Paper dust meter | Product Information: Paper dust meter is suitable for measuring the dust degree of paper or cardboard, books, toilet paper, tissue paper, etc. ... |
 |
G354B toilet paper dispersibility testing machine | G354B toilet paper dispersibility testing machine - Other test instrument - standard Product Introduction: G354B toilet paper dispersibility test... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
