Metal Wire Repeated Bending Tester
Main uses:
Metal wire repeated bending tester used for repeated bending test of wire, for different specifications of wire bending radius can be replaced with different round rod, bending position （height） can be adjusted, perforation diameter to replace different bushings.
Test principle:
The sample of a certain diameter is clamped in two round rods of specified size, press the button, the sample is bent at about 90°, the sample is broken, and the bending number is automatically stopped, and the bending number is recorded to test the performance of the metal wire under plastic deformation and the defects displayed during repeated bending.
Meet the standard:
GB/T 238-2013 "Metal material wire repeated bending test method"
GB/T 235 "Metal material thickness is less than or equal to 3mm sheet and thin strip repeated test method"
ISO/DIS 7801-1983 "Repeated bending test of metal wire"
Product Advantages:
Evaluates Bending Fatigue: Directly assesses the wire's resistance to repeated bending stress.
Quantifies Ductility: Provides a numerical value (number of bends to failure) for wire ductility under dynamic bending.
Detects Defects: Repeated bending can reveal hidden surface or internal defects that may lead to premature failure.
Standardized Testing: Enables testing according to established national and international standards.
Controlled Test Parameters: Ensures repeatable and comparable test results through precise control of bending angle, speed, and radius.
Automated Operation: Automatic stopping upon fracture and cycle counting simplify the testing process.
Versatile: Can test a range of wire diameters and allows for adjustment of test parameters.
Main parameters:
1, sample diameter: 0.3——6mm or 4——10mm
2, sample length: 150——200mm
3, bending Angle: left and right bending 90 degrees
4. Bending speed: 60 times/min
5. Counting range: 0-9999 times
6. Motor power: 1.1KW
在线联系供应商
Other supplier products
|
|
Metal Wire Repeated Bending Tester | Main uses: Metal wire repeated bending tester used for repeated bending test of wire, for different specifications of wire bending radius can be r... |
 |
G259A Sweating Guarded Hotplate-EN ISO11092 ASTMF1868-09 | Standards: GB/T11048. ISO11092. ASTMF1868-09. BS8515. ASTMD1518-2014. JIS L1096-2010. ASTM F 1868-02 Product Information: G259A Sweating Guarded... |
 |
Rubber Resilience Tester | Introduction: A Rubber Resilience Tester is a specialized instrument used to measure the resilience (or rebound elasticity) of rubber and rubber-l... |
 |
Battery Slurry Resistance Tester | Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement of ... |
 |
G631A electric shoe stripping testing machine | Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the principle is to load the... |
Same products
 |
KL‑016A Benchtop High‑precision pH Meter | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | 卖方: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
