Circular Locus Pilling Tester
The instrument is used to test the pilling conditions ofwool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in the humidity state.
Standard
GB/T.1Determination of pilling properties of textile fabrics - Part 1: Circular trajectory method
JIGBell-type gas flow standard device verification procedures
DIN.2Testing of textiles - Wear test of flat fabrics – Roll to mill
JIGBell-type gas flow standard device verification procedures
DIN.2Testing of textiles - Wear test of flat fabrics – Roll to mill
Test Parameters
| Items | Parameters |
| Grinding head is in contact with grinding plane | ≤0.2mm |
| The parallelism of grinding head and grinding plane | ≤0.3mm |
| The relative movement trajectory of grinding head and grinding plane | 40±1mm |
| Nylon brush surface is flush, its height difference | <0.5mm |
| Grinding plane reciprocating speed | 60±1 times/min |
| Weight of grinding head | 490cN±1% |
| Weight of heavy hammer | 290cN±1% |
| Weight of hammer | 100cN±1% |
| Select the number of times | 1~9999 |
Features
1. Scientific mechanical structure, smooth rotation, no mechanical noise, no contact fatigue failure, suitable for long continuous operation.
2. The use of standard nylon brush, the rigidity of nylon wire must be uniform, so as to control the fluff effect of nylon brush.
3. Ergonomic design, the surface using a spray forming, smooth and beautiful.
2. The use of standard nylon brush, the rigidity of nylon wire must be uniform, so as to control the fluff effect of nylon brush.
3. Ergonomic design, the surface using a spray forming, smooth and beautiful.
Test Reference
| Sample type | Pressure / cN | Number of fluff times | Number of pilling times |
| Synthetic fiber knitted fabric | 590 | 150 | 150 |
| Chemical fiber woven fabric | 590 | 50 | 50 |
| Military service (combed blended) | 490 | 30 | 50 |
| Combed wool fabric | 780 | 0 | 600 |
| Coarse wool fabric | 490 | 0 | 50 |
在线联系供应商
Other supplier products
 |
Yarn Twist Tester | TheSkein Length Testeris used to accurately measure the length of the yarn, for the determination of the yarn density or count of the yarn and the ... |
 |
Sweating Thermal Manikin | Introduction: The sweating thermal manikin test system simulates the physical mechanism and heat exchange from the outside world. Obtain the therm... |
|
|
Circular Locus Pilling Tester | The instrument is used to test the pilling conditions ofwool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product ... |
 |
Digital Auto Burst Strength Tester | Standards: ASTM D3786, ERT 80-4-20, GB/T 7742.1, BS EN ISO 13938-1, BS 3424-6-B, ISO 3303-B, ISO 2758, ISO 3303.2, ISO 3689, JIS L1018/L1093, IWS ... |
 |
MMT Liquid Water Separation Tester | I. Product Overview TheMMT Liquid Water Separation Testeris a precision instrument designed to evaluate the water repellency and separation effici... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
