AATCC KMS-M6 Washer, KMS-M6D Dryer
I. Product Overview
TheAATCC KMS-M6 Washer & KMS-M6D Dryerare precision textile testing instruments designed to evaluate fabric durability, colorfastness, and dimensional stability under controlled washing and drying conditions. These machines comply with AATCC Standard Test Method M6, simulating industrial laundering processes to assess textile performance in real-world applications.
- Type: Stackable washer-dryer system for textile testing
- Key Metrics:
- Colorfastness (ΔE CIELAB)
- Shrinkage Rate (%)
- Fiber Breakage Count
- Capacity: 5–10kg per cycle (adjustable load)
- Applications: Garment manufacturing, textile R&D, quality control
II. Technical Specifications
| Parameter | KMS-M6 Washer | KMS-M6D Dryer |
|---|---|---|
| Temperature Range | 20°C–95°C (±1°C) | 30°C–80°C (±1°C) |
| Cycle Types | Delicate, Normal, Heavy Duty (AATCC M6) | Tumble Dry, Air Fluff (AATCC 133) |
| Water Consumption | 15L/cycle | Not applicable (dry cycle) |
| Spin Speed | 800–1200 RPM | 800 RPM (low-speed tumbling) |
| Power Supply | 220V/50Hz, 1.5kW | 220V/50Hz, 1.2kW |
| Dimensions | 600×600×1100mm | 600×600×1000mm |
III. Key Features
- Integrated Testing System:
- KMS-M6 Washer:Simulates industrial wash cycles with programmable detergent injection
- KMS-M6D Dryer:Features airflow adjustment for colorfastness evaluation
- Advanced Controls:
- 7-inch touchscreen interface
- 100 pre-programmed AATCC/ISO test cycles
- Real-time vibration monitoring
- Compliance:
- AATCC M6 (Colorfastness to laundering)
- ISO 105-C06 (Textile colorfastness)
- ASTM D4685 (Washer-dryer testing)
IV. Applications
- Quality Control:Batch testing of dyed fabrics for commercial use
- R&D:Developing wrinkle-resistant and color-retaining textiles
- Education:Training on textile care labeling compliance
- Forensic Analysis:Evaluating garment damage from improper laundering
Standard Operation Workflow:
- Sample Preparation: Cut 100×100mm specimens
- Washer Setup: Select cycle (e.g., AATCC M6-2013)
- Dryer Setup: Adjust airflow and temperature
- Cycling: Run 5–10 consecutive wash/dry cycles
- Analysis: Measure color change via spectrophotometer
Safety Precautions:
- Load balance required (±50g tolerance)
- Avoid overloading detergent compartment
- Use heat-resistant gloves during operation
* AATCC-certified test protocols * Water-efficient closed-loop system * Vibration-dampening frame * Includes 5-year calibration service * Stackable design saves lab space**Technical Highlights**- ±0.5 ΔE color accuracy (NIST-traceable) - 100% cotton-to-synthetic compatibility - Auto-detect load size and adjust water levels - WiFi data export to cloud platforms - Energy-saving eco-mode (30% power reduction)
在线联系供应商
Other supplier products
 |
Fabric Negative-ion Concentration Tester | The negative ion generation tester is mainly used to detect the negative ion generation of textiles, and evaluate the negative ion generation capac... |
 |
Wool Fineness Analyzer | Wool fiber fineness value is measured by the airflow method. When exerting a certain pressure air to a certain amount of mass and volume of sample ... |
 |
Textile Fabric Steam Shrinkage Tester | Testing Standards: ISO 3005, BS 4323, NEXT TM 15, M&S P8, IWTO 29-76 Application: This instrument is suitable for woven fabrics and knit... |
 |
Scorch Tester/Sublimation fastness tester | In the daily process of shaping and high temperature ironing, dyes heat stability will affect the appearance of fabrics.. Dyes heating , heat trans... |
 |
hydrostatic head testing equipment | Hydrostatic head testing equipmentIntroductionThe hydrostatic head tester is designed to test the pressure that the material does not come into con... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
