Computer-controlled Helmet Impact Tester
Introduction：
In a world where safety is paramount, especially for activities ranging from motorcycling and cycling to industrial work and extreme sports, helmets are the ultimate line of defense. The true measure of a helmet's protective capability lies in its ability to absorb and dissipate impact forces effectively. This is where the Computer-Controlled Helmet Impact Tester steps in, offering a state-of-the-art solution for precise, repeatable, and comprehensive evaluation of helmet performance under impact.
This advanced testing system is designed to simulate real-world impact scenarios with unparalleled accuracy, providing critical data for manufacturers, research and development teams, and certification bodies dedicated to creating the safest head protection available.
Application Scope
This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the impact - resistance performance and penetration - resistance of helmets.
Specifications
1 System components: consists of a crash test stand and an analysis recorder.
2 Crash test bench: composed of fall guidance device, head type, head type fixed frame, ball joint, anvil, anvil seat, release guidance system and seat base and other components.
3 Impact height: control interface setting, with guidance system, acceleration detection and calibration device (1000 ~ 3000mm can be customized)
4 Base: the optimal solution is made of reinforced concrete, the instrument's steel base is connected to the concrete base, so that its quality is not less than 1600kg.
5 Test and Analysis Instrumentation System: consists of acceleration sensors or impact sensors, amplifiers, and data processing, display and recording, and other components. Part of the composition
Standard
GB 811 GB 24429
GB/T 38305-2019 GA 44
Dimensions (L*W*H*H cm): 90*80*450 (according to the order impact height)
Weight (kg): 350
Installation requirements:
1 Power supply: AC 220V 50Hz 500W
2 Environment: 10 ~ 35 ℃
3 Operation: floor, connected to the concrete pedestal
在线联系供应商
Other supplier products
 |
Carton drop tester | Hardened Concrete Bubble Spacing Coefficient Analyzer - Other test instrument - standard Standards: GB/T4857.5, 1S02248, etc. Applications... |
 |
BBA steady state solar simulator tester | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photo... |
 |
Protective Clothing Resistance Tester | Scope of Application: This machine is used for the point-to-point resistivity test of anti-static work clothes and anti-static fabrics, complying ... |
 |
Battery Isothermal Calorimeter | Product Description Battery Isothermal Calorimeter is a professional instrument developed based on the principle of power compensation isothermal ... |
 |
Molten Metal Penetration Resistance Tester | Standard ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash) ASTM F955(Standard Test Method for Evaluating Heat Tra... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
