Helmet Xenon Aging Tester/ safety helmet aging test equipment/ Helmet Xenon Lamp Aging Tester
Standards
GB/T2014-9-19. ISO 4892
ASTM G151. G154. D4329
d4587、d4799、sae j2020
Xenon lamp aging test box structure
1. the box is molded by CNC machine tool processing, beautiful and generous shape, the lid is two-way flip type, easy to operate.
2. the inner liner is made of imported stainless steel plate, the outer liner is sprayed with A3 steel plate, which increases the appearance of texture and cleanliness.
3. heating mode for the inner liner sink heating, warming fast temperature distribution.
4、Drainage system using back to the vortex type and U-type sedimentation device drainage, convenient for users to clean.
Helmet xenon lamp aging test chamber applications
Xenon lamp aging test chamber, also known as xenon arc lamp aging test chamber, the application of a wide range of industries, such as: coatings ink paints, resins, plastics, printing and packaging, adhesives, automotive and motorcycle industries, cosmetics, metals, electronics, electroplating, pharmaceuticals, etc. Xenon arc lamp aging test chamber can quickly and realistically reproduces the sunlight, rain, dew on the materials of the damage: it takes only a few days or a few weeks Q8 to reproduce outdoor need months or years To produce damage: including fading, discoloration, brightness loss, chalking, cracking, blurring, embrittlement, strength loss and oxidation.
Xenon lamp aging test chamber features
1. the specimen installation thickness can be adjusted, the specimen is fast and easy to press and install.
2. the upward rotating door does not hinder the user to operate the equipment, only occupies a small space.
3. unique condensation system using ordinary tap water can meet the requirements.
4、Water heater is under the container, not immersed in water, long life, easy maintenance.
5、Water level control is placed on the outside of the UV box, easy to monitor.
6. the equipment has casters, easy to move, casters are standard accessories.
8、Computer programming is convenient, misoperation and fault automatic alarm. Light intensity programmable
9. there amplitude illumination calibrator calibration can extend the lamp life (longer than 1600 hours).
9. there are Chinese and English manual, easy to access.
10. divided into ordinary, light amplitude illumination control type, spray type.
Xenon lamp aging test chamber technical parameters
1. the condensing device simulates the effect of outdoor humidity, the humidity can be achieved
2. there is an electronic eye irradiance control system
3. through the blackboard temperature sensor to measure the temperature accurately, can be repeated to reproduce the test results
4、Humidity, condensation, water spray can cycle continuous test
5. amplitude illuminance with CR-10 calibrator traceability and automatic calibration procedures
6. the number of test samples: 75mm × 300mm samples 24 75mm × 150mm samples 48 pieces
Xenon lamp aging test chamber control system
1. light and condensation of independent control time and alternate cycle control time can be set arbitrarily within 999h.
2、French “Schneider” components, Philips rectifier and starter (to ensure that each boot can light up the ultraviolet lamp).
3、Using black aluminum plate to connect the temperature sensor, using the blackboard temperature, instrument control heating, temperature is more stable.
4、Radiometer probe adopts fixed type, without loading and unloading every time.
5. radiation using high-precision display and measurement of ultraviolet irradiance meter.
6. light and condensation can be duly controlled can alternate cycle control.
在线联系供应商
Other supplier products
 |
Mask Filter Efficiency Tester | Standards: EN 143 Protection device, particle filter requirement, test, mark EN 149 Respiratory protection device, microparticle filter with hal... |
 |
Air Permeability Tester | Standards: BS 5636, JIS L1096-A, DIN 53887, ASTM D737, ASTM D3574, EN ISO 9237, GB/T 5453, EDANA 140.2, TAPPI T251, EDANA 140.1, ASTM D737, AFNO... |
 |
Negative pressure tester for medical syringes | Negative pressure tester for medical syringes - Other test instrument - standard Product Information: Instrument characteristics It is compo... |
 |
Universal Abrasion Resistance Tester | Standards: ASTM D3514/D3885/D3886，AATCC 119/120，FTMS 191/5300/5302，FORD EFB 15J2/BN 112-01 Applications: Universal Wear Tester, to deter... |
 |
KES - FB3 - A Compression Tester | Content TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by artisans and professionals when judging a... |
Same products
 |
KL‑016A Benchtop High‑precision pH Meter | 卖方: 科立龙电子股份有限公司ctron Co.Ltd | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | 卖方: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
