" Battery Powder Compaction Density Measurement System"
Standard
Engineered to comply with global testing standards (ISO 3953,ASTM B527), our Powder Tapped Density Analyzer provides certified results for quality control in pharmaceuticals, batteries, ceramics, and additive manufacturing. Meets CE/UL safety certifications for laboratory equipment.
Product Advantages
- Unparalleled Precision
- Dynamic Tapping Mechanism: Programmable tapping cycles (1–3000 taps) with adjustable amplitude (1–50 mm) to simulate industrial compaction processes.
- High-Resolution Sensing: Laser-based volume detection (±0.01 cm³ accuracy) captures subtle density changes in micro-powders.
- Automated Workflow
- One-Touch Operation: Preset protocols for pharmaceutical USP methods or custom tapping sequences. Automatically calculate Hausner Ratio and Carr Index.
- Real-Time Curve Generation: Plot density vs. tap count, pressure, and environmental conditions (temperature/humidity) during testing.
- Material Versatility
- Optimized for:
- Battery electrodes (Li-ion, Na-ion, solid-state)
- Pharmaceutical excipients and APIs
- 3D printing powders (metal, ceramic, polymer)
- Abrasives, catalysts, and food additives
- Optimized for:
- Data Integrity
- 21 CFR Part 11-compliant software with audit trails, electronic signatures, and encrypted data storage. Export reports in PDF/Excel formats.
- Calibration Assurance
- Pre-installed NIST-traceable density standards (1 g/cm³, 2.5 g/cm³) for instant verification.
Product Features
- Pressure Control: Closed-loop hydraulic system applies up to500 MPawith ±0.1% FS stability.
- Environmental Monitoring: Integrated sensors for temperature (-10°C to 80°C) and humidity (5–95% RH) with automatic drift correction.
- Modular Design: Swapable testing cells (1–500 cm³) for R&D to production-scale samples.
- Safety: Overpressure protection, emergency stop, and HEPA-filtered dust containment.
- Connectivity: Wi-Fi/Bluetooth for remote monitoring, compatible with LIMS systems.
Technical Parameters
| Parameter | Specification |
|---|---|
| Tapping Range | 1–3000 taps (adjustable speed: 10–60 taps/min) |
| Density Measurement | 0.1–5.0 g/cm³ (±0.005 g/cm³ accuracy) |
| Pressure Application | 0–370 MPa (programmable ramp rates) |
| Temperature Control | -10°C to 80°C (±0.2°C stability) |
| Humidity Tolerance | 5–95% RH (non-condensing) |
| Display/Interface | 10.1" touchscreen with multi-language GUI |
| Power Consumption | 600 W (110–240 V AC, 50/60 Hz) |
| Dimensions (W×D×H) | 500 × 600 × 800 mm |
Accessories Included
- Main Unit: Powder Tapped Density Analyzer with safety enclosure.
- Software Package: Compliance-ready SPC software with FDA 21 CFR Part 11 modules.
- Testing Kits:
- Set of 3 stainless-steel density cells (10 cm³, 50 cm³, 250 cm³).
- Calibration weights (100 g, 500 g) with certificate.
- Dust Management: HEPA filter unit and anti-static brush.
- User Documentation: Multilingual quick-start guide and maintenance manual.
在线联系供应商
Other supplier products
 |
Compression Test device | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by artisans and professionals when judging a fabric' s ... |
 |
Electrical bushing flame retardant tester | Product Introduction: The flame retardant test instrument for electrical bushing is used to measure the flame retardant performance of PVC cold fo... |
 |
Tearing Strength Tester | Introdution: Tearing strength tester is used to determinate the tearing resistance of property of films, sheets, flexible PVC, PVDC, waterproof fi... |
 |
Coatings Shear tester | Standard YY/T 0856-2011 (China): Specifies mechanical testing protocols for metal angular fixators, including single-compression bending and bendi... |
 |
Mask Bacterial Filtration Efficiency meter | Medical Masks bacterial filtration efficiency tester also called BFE test machine is to determine the bacterial filtration efficiency (BFE) of medi... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
