Helmet Surface Friction Testing Machine
A helmet surface friction testing machine is a device used to test the frictional force between the surface of a helmet and other objects. Its main purpose is to ensure that the helmet has sufficient friction during use to prevent slipping or falling off, thereby improving safety.
Application
The Helmet Surface Friction Tester presses a helmet onto a movable fixture with a certain force. The surface of the fixture is attached with sandpaper of the grain size specified in the standard. Then, the test helmet is moved across the surface of the sandpaper at a certain speed, so as to evaluate the abrasion - resistance performance of the helmet.
Standards
GB 811-2022:Helmets for motorcycle and electric bicycle users
Features
1、PLC touch screen control
2、Horizontally oriented carrier with exchangeable mounting of sandpaper and cutting knives
3、Head type can be rotated 360
4、With professional speed measuring tooling
Parameters
| Item | Detail |
|---|---|
| Friction sandpaper | 300mm - 303mm long, grade 80 aluminum oxide coated sandpaper |
| Steel cutter | 6mm high, 25mm wide, with the top edge chamfered at a radius of 1mm |
| Impact weights | 15kg - 15.5kg |
| Fall height of the weight | 0 - 1000mm |
| Pre-loaded weight | 400N - 410N |
| Sensor range | 0 - 120mm |
| Instrument power supply | 220V 50HZ |
Accessoriess
Abrasive sandpaper
Steel cutting blade
Movable clamp
Horizontal guide rail and support frame, etc.
Test Procedures
The helmet is pressed against a movable clamp with a certain force.
The surface of the clamp is covered with sandpaper of a standard specified grit size.
The helmet is then moved across the sandpaper surface at a certain speed.
The friction resistance of the helmet is evaluated by observing and measuring the frictional force.
These steps ensure that the helmet has sufficient friction during use to prevent slipping or falling off, thereby improving safety.
在线联系供应商
Other supplier products
 |
Pipe coating scratch meter | Product Introduction: Paint and varnish scratch resistance tester, also known as scratch resistance tester or balanced scratch rod adhesion resist... |
 |
UV Lamp Aging Test Tester | Standard JTG E50 T1164: Testing methods for geosynthetics in highway engineering. GB/T 14522-93: Accelerated weathering tests for plastics, coati... |
 |
Intervertebral Fusion Cages Torsion Fatigue Tester | Standard YY/T 0959-2014 (China): Specifies torsional fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency... |
 |
Deval abrasion chamber | Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion rate test, suitable for European standards, French standar... |
 |
Thermal Radiation Flooring Combustion Tester | Product Standards ISO 9239 - 1: Reaction to fire tests for floor coverings - Part 1: Determination of the burning behaviour of floor coverings usi... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
