Gas Hazardous Characteristics Tester
Product Introduction
This tester is used to test the flammable concentration range of gases in air. It is suitable for the vast majority of pure flammable gases and mixtures composed of several pure flammable gases in proportion. It complies with GB 19521.3 - 2004 *Safety Specification for Inspection of Characteristics of Flammable Gas Dangerous Goods.
Standards
GB1952.3-2004
uISO10156：1996
uGB5085.4
uNY/T1860
Product Features
1. It adopts an embedded processor and the Windows CE operating system.
2. With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time. 3. The high - resolution photosensitive sensor has a short response time, ensuring that the gas can be captured instantly during flash - explosion and an inspection signal can be output. 4. It uses dual - channel digital flow meters. With high - precision gas flow control, it enables the precise mixing of the gas to be tested and air. 5. The instrument is equipped with an online gas - sampling channel, and the gas to be tested can be determined by gas chromatography - mass spectrometry (GC/MS) and other means. 6. Through a high - precision photosensitive sensor, the instrument can sense the light intensity in the reaction tube in real - time, automatically determine whether the gas at this concentration is flammable, and simultaneously give the combustion rate value. 7. During the test process, it can automatically determine the flammability and control the increase of gas concentration in steps. 8. The reaction chamber is equipped with double - layer tempered glass to protect the safety of experimenters. 9. The test process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.
Technical parameters
|
Operating Environment |
(5~40)℃, <85%RH |
|
Flow Control Range |
(5~500)sccm |
|
Flow Control Accuracy |
±1%FS |
|
Flow Measurement Response Time |
≤1s |
|
Combustion Detection Response Time |
≤1ms |
|
Reaction Tube Size |
300mm long, 50mm inner diameter, 5mm thick |
|
Combustion Velocity Detection Range |
≤500cm/s |
|
Combustion Velocity Detection Model Accuracy |
5mm/s |
|
Gas Channel Inlet Pressure |
≤5MPa |
|
Gas Sampling Bag |
1L |
在线联系供应商
Other supplier products
 |
Adhesion Strength Tester | Application The instrument is suitable for quantitative evaluation of adhesion and mechanical strength in a wide range of materials and bonded str... |
 |
Full Notch Creep Tester | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable f... |
 |
Safety Helmets Acceleration Impact & Penetration Tester | Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-1 (Industrial Safety Helmets – Impact Absorpti... |
 |
Motor Accessories Combustion Testing Machine, Fmvss 302，ISO 3795 | Introduction: This machine is designed according to ISO3795 standards and relevant clauses. Apply to identify vehicles (cars, multipurpose passeng... |
 |
Strength Tester for Lead - end of Photovoltaic Modules | Standard IEC 61215-2:2016: Terrestrial Photovoltaic (PV) Modules – Test Requirements for Electrical and Mechanical Components CE Certificat... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
