Carpet Static Electricity Tester

Test Principle

When a person walks on the inspected carpet wearing the shoes specified in the standard and following the prescribed walking pattern, and is under monitored atmospheric conditions, the potential difference relative to the earth's voltage (0 potential) generated during walking is measured. This measurement is used to evaluate the risk level of discomfort caused by static electricity shocks during the use of this carpet. We use the electrostatic potential difference between the human body and the earth to represent human - body static electricity. The testers walk on the inspected carpet (floor covering) wearing the test shoes specified in the standard and following the prescribed walking pattern in a regulated atmospheric environment. At this time, measuring the human - body electrostatic potential actually reflects the electrostatic characteristics of the potential of equal - magnitude and opposite - polarity charges carried by the carpet.

Applicable Standards

GB/T 18044 - 2008 Carpet - Evaluation method for electrostatic behavior - Walking test

BS ISO 6356 Floor coverings - Assessment of electrostatic properties - Walking test

Main Applications

The carpet static electricity tester (walking test) is mainly used for the anti - static testing of carpets and other floor covering materials. It can be used by carpet manufacturing enterprises, carpet fiber production enterprises, textile (carpet) inspection institutions, the aviation and automotive interior industries, as well as scientific research institutions for quality inspection and technical evaluation.

Technical Parameters

1. Grounded metal base plate: (100×200) cm, made of 1mm - thick aluminum plate.

2. Rubber mat: (220×120) cm, with a thickness of (4.5±0.5) mm.

3. Input resistance of the voltmeter and hand - held electrode system: ≥10¹⁴Ω.

4. Input capacitance of the hand - held electrode: ≤20pF.

5. Measuring voltage range: (-20～+20) kV, with an accuracy of 0.1kV.

6. Test duration: 60s.

7. Atmospheric conditions for adjustment and testing: Temperature: (23±1) °C, Humidity: (25±3) %RH.

8. Standard carpets should be purchased by the user.

Other supplier products

	Full Face Helmet Flame Resistance Tester	Full Face Helmet Flame Resistance TesterMedical mask fire test machine is to determine the fire resistance performance of medical face masks and fu...
	Nanofiber electrospinning device	The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easily produce nanofibers with diameters of 50 to 800 nm. This dev...
	Standard pacifier safety tester	Overview In the infant care industry, bottle quality directly impacts infant health. The NPNZ-01 Baby Bottle Mechanical Performance Tester is spec...
	Thermal Stability Testing Machine	Features and Benefits 1. The temperature control accuracy can reach ±0.5℃, and the humidity control accuracy can reach ±2.5%RH, whic...
	Intervertebral Fusion Cages Torsion Fatigue Tester	Standard YY/T 0959-2014 (China): Specifies torsional fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency...

供应产品

Same products

	Air Permeability Tester STD- F8	卖方: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	卖方: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	卖方: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	卖方: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	卖方: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...