Alcohol abrasion tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Alcohol Abrasion Tester is designed for evaluating the wear and friction resistance of coatings, prints, and surfaces under controlled laboratory conditions. It simulates real-world abrasion scenarios using various friction media such as erasers, alcohol-soaked cotton, steel velvet, and sheepskin. Widely applicable in plastics, wires, electronics, and leather industries, it provides accurate, repeatable results for quality control and product development.
Application
(1) Testing abrasion resistance of printed coatings on plastics, electronic housings, wires, and leather.
(2) Evaluating durability of oil sprays, screen prints, and surface coatings under repeated friction.
(3) Quality control for consumer electronics, household appliances, and automotive interior materials.
(4) Research and development of new coatings, inks, or protective finishes.
(5) Assessing the wear resistance of decorative or functional surfaces in manufacturing.
(6) Comparing performance of different friction media on material surfaces.
(7) Determining material performance under simulated operational abrasion conditions.
Standards
(1) ASTM D6279 – Standard Test Method for Abrasion Resistance of Coatings by Taber Abraser.
(2) AATCC Test Method 8 / ISO 105-X12 – Colorfastness to Crocking.
(3) ASTM D3363 – Standard Test Method for Film Hardness by Pencil Test.
(4) UL 969 / UL 2601-1 – Standard for Marking and Labeling Systems.
Features
(1) Reciprocating Motion System with variable convex shaft and Japanese original ball drive for smooth and precise movement.
(2) Double Test Stations allow simultaneous testing of two samples.
(3) Adjustable Working Stroke from 2mm to 50mm.
(4) Variable Working Speed from 10 to 60 cycles per minute (rpm).
(5) Digital LCD Counter capable of displaying up to 999,999 cycles.
(6) Four independent friction groups supporting multiple friction media simultaneously.
(7) Load Application System with calibrated weights (100g, 200g, 300g, 500g, two of each) for precise force application.
(8) Compatible with diverse friction media: eraser, alcohol/cotton, steel velvet, sheepskin.
(9) Motorized drive (25W) ensures consistent operation.
(10) Substantial workpiece table (400x200mm) for secure sample placement.
(11) Compact and robust design suitable for laboratory use.
Parameters
| Parameter | Specification |
|---|---|
| Friction media | Eraser, alcohol/cotton, steel velvet, sheepskin (user-supplied) |
| Load weights | 100g, 200g, 300g, 500g (two of each) |
| Counter | 0–999,999 LCD display |
| Working stroke | 2–50mm adjustable |
| Working speed | 10–60 rpm adjustable |
| Number of friction groups | 4 |
| Motor | 25W |
| Power supply | AC220V/50Hz |
| Dimensions (L×W×H) | 500×460×550mm |
| Net weight | 26kg |
| Workpiece table size | 400×200mm |
Accessories
(1) Calibrated load weights: 100g, 200g, 300g, 500g (two of each).
(2) Friction media holders for erasers, alcohol/cotton, steel velvet, sheepskin.
(3) Workpiece table for securing samples.
(4) Motor drive system.
(5) Digital LCD friction counter.
Test Procedures
(1) Secure the sample on the workpiece table.
(2) Select friction media and attach to the respective friction group.
(3) Apply calibrated load weights as required for the test.
(4) Set working stroke and speed according to the test requirements.
(5) Start the motorized reciprocating motion; the sample undergoes friction cycles.
(6) Monitor the cycle count via the digital LCD counter.
(7) Upon reaching the desired number of cycles, stop the test and evaluate the sample surface for wear or damage.
(8) Record observations and data for analysis.
Maintenance Information
(1) Clean friction media and holders after each test to prevent contamination.
(2) Check and maintain the motor drive and ball drive mechanism periodically.
(3) Inspect calibrated weights for wear or damage.
(4) Keep the workpiece table clean and free of debris.
(5) Store the instrument in a dry and stable environment.
(6) Verify calibration of the digital LCD counter periodically for accurate cycle counting
在线联系供应商
Other supplier products
 |
Medical Intramedullary Nail Fatigue Testing Equipment ASTM Certified | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1)YY/T 0591-2011: Chinese standard specifying bending fatigue tes... |
 |
ASTM D5034 Flame Retardant Performance for Electrical Bushings | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The flame retardant test instrument for electrical bushing is used to measure... |
 |
Laundry Washer and Dryer Machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Washer-Dryer Combo integrates washing and drying functions into a single, space-saving ... |
 |
Vacuum Ball - Disk Friction Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com A vacuum ball-on-disk friction tester is a device used to simulate friction and wear behavi... |
 |
Metal Ring-and-Block Friction and Wear Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Metal Ring-and-Block Friction and Wear Tester is a laboratory testing machine designed ... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
