Pipe coating scratch tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Pipe Coating Scratch Tester, also known as a paint and varnish scratch resistance tester or balanced scratch rod adhesion tester, is a precision instrument designed to evaluate the scratch resistance of single or composite coating systems on insulating color-coated boards or pipes. The test determines the maximum weight at which a steel spherical needle either scratches the coating or leaves it intact, providing a quantitative assessment of coating durability. The device offers real-time display of scratch results, enabling accurate quality control and material evaluation.
Application
(1) Scratch resistance evaluation of single-layer coatings on insulating color-coated boards or pipes.
(2) Scratch resistance testing of multi-layer or composite coating systems.
(3) Quality control of industrial coatings for pipelines, tanks, and metal structures.
(4) Research and development of new coatings with improved mechanical resistance.
(5) Comparative analysis of coatings to select optimal formulations for industrial applications.
(6) Educational and laboratory demonstration for coating durability testing.
Standards
(1) AS/NZS AS2924.2 – Scratch resistance of coatings.
(2) ASTM C217 – Varnish and coating resistance.
(3) BS EN 438.2 – Scratch resistance of laminates.
(4) BS EN 13310 – Scratch and abrasion resistance of surfaces.
(5) BS EN 14323 – Coating performance of panels.
(6) BS EN 14688 – Scratch testing for decorative coatings.
(7) DIN 53799 – Paint scratch resistance.
(8) DIN 68861-4 – Mechanical properties of coated materials.
(9) ISO 1518 – Paints and varnishes – Scratch test.
(10) BS 3900 – Methods for evaluating coatings.
(11) ASTM D5178 – Standard test for scratch resistance.
(12) ASTM D2197 – Coating film hardness and scratch performance.
Features
(1) Evaluates scratch resistance of both single and composite coating systems.
(2) Uses a spherical steel needle to provide precise, repeatable scratch testing.
(3) Adjustable travel speed (1–120 mm/sec) to simulate different scratch conditions.
(4) Real-time display of scratched or unscratched coating results on the conductor substrate.
(5) Supports various steel ball needle diameters (1 mm standard; 1.6 mm optional).
(6) Adjustable standard weights for testing different coating strengths (200 g, 500 g, 2000 g, etc.).
(7) Compact design suitable for laboratory and industrial testing environments.
(8) Conforms to international and national standards (ISO, ASTM, BS, DIN).
Technical Parameters
| Parameter | Specification |
|---|---|
| Test Speed | 1–120 mm/sec (adjustable) |
| Travel Distance | 100 mm |
| Power Supply | 220 V / 50 Hz |
| Standard Steel Ball Needle Diameter | 1 mm (optional 1.6 mm) |
| Standard Weights | 200 g, 500 g, 2000 g each 1; 50 g, 100 g, 1000 g each 2 (optional purchase) |
| Display | Real-time scratched/unscratched indication |
| Applicable Materials | Insulating color-coated boards, pipes, and similar coated surfaces |
Accessories
(1) Set of standard steel ball needles (1 mm, optional 1.6 mm).
(2) Standard weights (200 g, 500 g, 2000 g, etc.).
(3) Mounting fixture for coated samples.
(4) Calibration tools for needle and weight verification.
(5) User manual and compliance certificates.
Test Procedures
Secure the sample on the testing platform.
Select the steel ball needle diameter and the corresponding test weight.
Adjust the travel speed according to the test requirement (1–120 mm/sec).
Start the scratch test, moving the steel needle across the coating surface.
Observe the real-time display for scratch occurrence.
Record whether the coating is scratched or unscratched at each applied weight.
Repeat the test with additional weights or needles if required.
Maintenance Information
(1) Clean the testing platform, steel needles, and weight system regularly to avoid debris affecting results.
(2) Inspect steel needles before each test; replace if worn or deformed.
(3) Verify calibration of travel speed and weight accuracy periodically.
(4) Keep the instrument in a dry, dust-free environment to ensure long-term stability.
(5) Lubricate moving parts according to manufacturer recommendations.
在线联系供应商
Other supplier products
 |
Automated high-pressure steam spray chamber | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The Steam Jet Test Chamber complies with a broad set of international automotive... |
 |
Sun Protection Factor Tester(UV proof tester) | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction: The sun protection factor tester is is also aUV proof tester,mainly used to ... |
 |
Bone Plates Static Four - point Bending Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0342-2022: Chinese standard specifying methods for determining bending stren... |
 |
Laboratory Explosion Limit Testing Equipment OEM Manufacturer | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards EN 13938-2:Respiratory Protective Equipment for Firefighters - Par... |
 |
Minimum Ignition Temperature (MIT) – Dust Cloud Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Description Dust Cloud Minimum Ignition Temperature Tester is mainly used to assess the ex... |
Same products
 |
Large Naïve VHH Library | 卖方: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
