Diaper impurity testing machine
The Diaper Impurity Testing Machine is designed for visual inspection of disposable diapers under controlled lighting conditions to detect residual fibers, particles, or foreign matter. It provides accurate and reliable results, supporting quality control, batch inspection, and research in the hygiene product industry.
Application
This instrument is suitable for impurity detection in a wide range of hygiene products:
Disposable diapers
Baby pants and training pants
Adult incontinence diapers
Sanitary napkins
Absorbent underpads
Wet wipes
Plastic-backed hygiene sheets
Laboratory research on raw materials and finished hygiene products
Evaluation of new absorbent materials and hygiene product designs
Standards
The instrument complies with multiple national and international standards:
(1) GB/T 28004.1-2021 Appendix C – Baby diaper impurity detection
(2) GB/T 28004.2-2021 Appendix C – Sanitary napkin inspection
(3) ASTM F2512 – Standard Test Method for Visual Inspection of Hygiene Products
(4) ISO 11948-1 – Absorbent hygiene product impurity evaluation
(5) JIS T 8130 – Disposable diaper testing
(6) EN 14619 – Disposable diaper residual foreign matter evaluation
Feature
(1) Adjustable LED light source with 0.01 lx to 8000 lx illumination.
(2) Durable electrostatic spray-painted surface, easy to clean.
(3) Imported aluminum brushed control panel with robust metal keys.
(4) Optimized platform and lighting for efficient impurity detection.
(5) User-friendly interface for simple visual inspection.
Parameters
| Parameter | Specification |
|---|---|
| Light source intensity | 0.01 lx – 8000 lx |
| Specimen placement plane | Polyethylene plate |
| Platform size | 300 mm × 250 mm |
| Power supply | AC 220V, 50 Hz, 80 W |
| Overall size | 420 mm × 370 mm × 600 mm (L × W × H) |
| Weight | 25 kg |
Accessories
Standard accessories:
Main unit
Portable carrying case
User manual
Optional accessories:
USB data output
Bluetooth data output
Test Procedures
(1) Prepare the instrument and press the power/selection button to turn on the device.
(2) Press the power/selection button to select the desired measurement mode: visible light transmission, three-light cycle, ultraviolet light transmission, or infrared light transmission. The instrument retains the last used mode after shutdown.
(3) Confirm calibration before measurement. Recalibrate if previous calibration is in doubt; calibration results are automatically stored.
(4) Position the instrument over the sample; the measurement value will be displayed. Avoid operating under strong ambient light.
(5) After measurement, press the power button until “OFF” appears to shut down the device.
Maintenance
(1) Keep the instrument clean; wipe the surface with a soft, dry cloth.
(2) Regularly check the LED light source for consistent illumination and replace if necessary.
(3) Store in a dry environment, avoiding direct sunlight and high humidity.
(4) Ensure proper calibration before extended use.
(5) Avoid exposure to corrosive substances or strong mechanical shock.
在线联系供应商
Other supplier products
 |
FPC Flex Durability chamber | Standard ASTM F392 Product features 1. the stepper motor drive, high-precision positioning, low noise, can be used for a long time 2. program-c... |
 |
Carpet Pilling and Fuzzing Tester | Instrument Description This instrument is used to simulate the pilling and fuzzing phenomena that occur during the normal use of carpets. The inst... |
 |
Spectrophotometer | Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards. ASTM E1164. DIN 5033: Compliant with industri... |
 |
Fiber Blend Ratio Test machine | Product Introduction: It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp... |
 |
Spectrophotometer tester | Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards. ASTM E1164. DIN 5033: Compliant with industri... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
