STD Battery short-circuit tester
Whats/App: +86 156 1874 6768
Web: standard-groups.com
The Battery Short-Circuit Tester is designed for external short-circuit safety testing of lithium-ion batteries and battery packs.
The system simulates external short-circuit conditions under both room temperature and elevated temperature environments, while simultaneously detecting, recording, and monitoring battery surface temperature during the test.
The equipment consists of a short-circuit control unit and a temperature-controlled explosion-proof oven. It meets the safety testing requirements of multiple international and national standards and is widely used for certification testing, quality control, and battery safety evaluation.
Application
(1) Consumer Electronics Batteries
Lithium-ion batteries and battery packs used in smarts, tablets, laptops, power banks, Bluetooth ears, smart watches and wearable devices.
(2) Power Tool Batteries
Rechargeable lithium battery packs for electric drills, screwdrivers, garden tools and portable industrial equipment.
(3) Electric Vehicle Batteries
Cylindrical, prismatic and pouch lithium-ion cells and battery modules used in electric vehicles (EV), hybrid electric vehicles (HEV) and electric motorcycles.
(4) Energy Storage Batteries
Lithium battery cells and modules for residential, commercial and industrial energy storage systems (ESS).
(5) New Energy Battery Modules
Battery packs and modules used in solar energy storage systems, backup power systems and telecom base stations.
(6) Small Portable Batteries
Button cells, coin cells and small-capacity lithium batteries used in medical devices, sensors and portable electronic products.
(7) Battery Certification & Compliance Testing
Applicable for battery safety testing in certification laboratories, third-party testing institutions and manufacturer quality control departments.
Standards
(1) IEC 62133-2012 – Safety Requirements for Portable Secondary Lithium Cells and Batteries
(2) UL 1642:2012 – Lithium Batteries Safety Standard
(3) UN 38.3 – Lithium Batteries Transport Testing
(4) GB 31241-2014 – Safety Requirements for Lithium-Ion Cells and Batteries
(5) GB/T 741-2014 – External Short-Circuit Test Method for Batteries
Features
(1) Designed for external short-circuit testing in accordance with GB 31241, UN 38.3, IEC 62133 and related standards
(2) Uses imported high-reliability DC contactors to ensure safe and stable short-circuit operation
(3) Explosion-proof hot-air oven with reinforced sheet-metal frame and high impact pressure resistance
(4) Cavity heating duct structure ensures uniform temperature distribution inside the oven
(5) Explosion-proof pressure relief port integrated into the oven design
(6) Explosion-proof laminated glass observation window with built-in lighting system
(7) Patented adapter terminals suitable for batteries of different sizes and short-circuit current levels
(8) Integrated battery surface temperature measurement system
(9) Real-time display of test current and voltage on meters
(10) High-quality electrical components ensuring stable long-term operation
(11) Supports switching between local control and remote operation
Technical Parameters
| Parameter | Specification |
|---|---|
| Test Item | External short-circuit test |
| Test Objects | Lithium-ion cells and battery packs |
| Applicable Standards | GB 31241-2014, UN 38.3, IEC 62133-2012, GB/T 741-2014 |
| Power Supply | Single-phase 220 VAC ±10% (110 VAC optional), 50/60 Hz |
| Rated Power | 1 kW |
| Operating Temperature | 25 ± 3 ℃ (recommended) |
| Operating Humidity | 30–90 %RH |
| Short-Circuit Voltage | Max. 100 V, accuracy ±0.2% |
| Short-Circuit Current | Max. 200 A, accuracy ±0.2% |
| Short-Circuit Resistance | 80 ± 20 mΩ, load 4 kW |
| Oven Temperature Range | Up to 150 ± 2 ℃ |
| Battery Temperature Measurement | Max. 200 ℃, accuracy ±1 ℃ |
| Explosion-Proof Oven Size | W700 × D570 × H935 mm |
| Control Cabinet Size | W530 × D400 × H1150 mm |
| System Weight | Approx. — kg (configuration dependent) |
Accessories
(1) Explosion-proof temperature-controlled oven
(2) Short-circuit control unit
(3) Imported DC contactors
(4) Battery adapter terminals for multiple sizes
(5) Surface temperature sensors
(6) Explosion-proof observation window
(7) Built-in illumination system
Test Procedures
(1) Place the battery sample inside the explosion-proof oven
(2) Connect the battery to the short-circuit terminals using appropriate adapters
(3) Set test temperature (room temperature or elevated temperature)
(4) Configure short-circuit parameters according to the selected standard
(5) Close and secure the oven door
(6) Initiate the short-circuit test
(7) Monitor current, voltage, and battery surface temperature in real time
(8) Record test data and evaluate battery safety performance after test completion
Maintenance Information
(1) Regularly inspect DC contactors and electrical connections
(2) Check explosion-proof oven seals and pressure relief components
(3) Verify temperature sensor accuracy periodically
(4) Keep ventilation ducts clean to maintain temperature uniformity
(5) Perform routine system calibration and safety checks
在线联系供应商
Other supplier products
 |
Finished shoe bending tester丨Finished shoe bending test mechine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Product Introduction: Finished shoes bending testing machine Finished shoes bending testin... |
 |
BS 5852 Combustion Tester，cigarette ignition tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com BS 5852 combustion test equipment is widely used to test the flame retardant properties in ... |
 |
Condiment packet pressure measuring machine | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The design and manufacture of the pressure resistance tester for sauce packets u... |
 |
Plastic biodegradation testing system for ISO compostability testing | Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The Plastic Biodegradation Testing System complies with and suppor... |
 |
Laboratory high-temp reciprocating wear tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Friction and wear testing of metals, alloys, ceramics, and surface coatings un... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
