Metal Wire Repeated Bending Tester
The Metal Wire Repeated Bending Tester is designed to evaluate the bending fatigue performance of metal wires under repeated stress. It measures the wire’s ductility and identifies potential surface or internal defects that may lead to premature failure. By applying controlled bending cycles, the tester provides quantitative results for wire performance assessment, quality control, and material research. It is widely used in wire manufacturing, R&D, and quality inspection departments.
Application
(1) Testing bending fatigue resistance of metal wires.
(2) Evaluating ductility and plastic deformation under repeated bending.
(3) Detecting hidden surface or internal defects in wires.
(4) Quality inspection in wire and cable manufacturing.
(5) Research and development of elevator ropes, spring wires, and electrical conductors.
(6) Testing wires used in automotive, aerospace, and construction industries.
(7) Laboratory experiments and materials research in universities and technical institutes.
Standards
(1) GB/T 238-2013 – Metal Material Wire Repeated Bending Test Method.
(2) GB/T 235 – Metal Material Sheets and Thin Strips (≤3mm) Repeated Bending Test Method.
(3) ISO/DIS 7801-1983 – Repeated Bending Test of Metal Wire.
(4) ASTM standards related to metal wire fatigue and bending tests.
(5) JIS and DIN standards for repeated bending and torsion testing of metallic materials.
Features
(1) Evaluates wire bending fatigue and resistance to repeated stress.
(2) Quantifies ductility through the number of bends to failure.
(3) Detects surface and internal defects that may cause premature failure.
(4) Provides standardized testing according to national and international standards.
(5) Adjustable bending radius, angle, and speed to suit different wire specifications.
(6) Automated operation with cycle counting and automatic stop at fracture.
(7) Suitable for production, R&D, and quality inspection applications.
Parameters
| Parameter | Specification |
|---|---|
| Sample diameter | 0.3–6 mm or 4–10 mm |
| Sample length | 150–200 mm |
| Bending angle | Left and right bending 90° |
| Bending speed | 60 times/min |
| Counting range | 0–9999 times |
| Motor power | 1.1 kW |
Accessories
(1) Main testing machine
(2) Adjustable round rods for different wire diameters
(3) Bushings for bending position adjustment
(4) Power cable
(5) User manual
Test Procedures
(1) Secure the wire sample between two round rods of the appropriate size.
(2) Adjust the bending position and bushing according to the sample specifications.
(3) Press the start button to initiate bending.
(4) The machine bends the wire alternately to 90° left and right.
(5) The machine automatically stops when the wire fractures and records the number of bends.
(6) Repeat the test for multiple samples as needed and record results.
Maintenance Information
(1) Regularly inspect the bending rods, bushings, and motor for wear or damage.
(2) Ensure the counting system operates correctly and is calibrated.
(3) Maintain power supply stability and check electrical connections.
(4) Clean the machine to prevent debris interference.
(5) Lubricate moving parts according to manufacturer guidelines.
(6) Handle the machine components carefully to prevent misalignment or damage during operation.
在线联系供应商
Other supplier products
 |
Box-Type UV Accelerated Aging Chamber | This test chamber simulates the hazards caused by sunlight exposure and rain. It utilizes fluorescent UV lamps to mimic sunlight and distilled wate... |
 |
Artificial turf wear tester | An artificial turf wear tester is a device specifically designed to evaluate the wear resistance of artificial turf. It tests the wear performance ... |
 |
Gas Hazardous Characteristics Tester | Product Introduction This tester is used to test the flammable concentration range of gases in air. It is suitable for the vast majority of pure f... |
 |
Steaming Cylinder | Standards ISO 3005. BS 4323. NEXT TM 15. M&S P8. IWTO 29-76 Applications: Used for steaming shrinkage test of fabric, meanwhile can perform ... |
 |
Dental Implants Static Torsion Testing Machine | Standard ISO 13498: Specifies static torsion testing protocols for dental implants, including torque application rates, failure criteria, and data... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
