Pinhole Tester
The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in aluminum foil materials.
Applications
The pinhole tester for aluminum foil plays a crucial role in the quality control of aluminum foil and its composite materials. As a material widely used in packaging, construction, electronics, and other fields, the size of the pinholes in aluminum foil directly affects its moisture - proof, gas - barrier, and light - shielding properties. Especially in the production of pharmaceutical aluminum foil, the detection of pinhole size is a key step related to the airtightness of pharmaceutical packaging and the quality of drugs. If there are dense, continuous, and periodic pinholes in the aluminum foil, it will increase the permeability of gases such as oxygen and water vapor through the aluminum foil, thereby affecting its moisture - proof performance and leading to the deterioration of drugs. Therefore, using a pinhole tester for aluminum foil to conduct strict pinhole detection on aluminum foil is an important means to ensure the quality of aluminum foil.
Standards
- YBB00152002 - 2015 Pharmaceutical Aluminum Foil
- GB/T 3198 - 2010 Aluminum and Aluminum Alloy Foil
- GB/T 22638.2 - 2008 Test Methods for Aluminum Foil
Features
• Maximum measuring aperture supports 2mm
• Exclusive top-opening cover design for easy lamp replacement
• Built-in handle on the top cover for easy handling and movement
• Quick-release latches on both sides of the top cover for convenient and fast opening
• Three adjustable power settings: 15W, 30W, and 45W
• High-quality lamp tubes ensure stable light source and long lifespan
• High-transmittance glass backing minimizes light obstruction
• 100X high-definition magnification for easier result observation
• Built-in inspection light for convenient counting
Technical Parameters
| Technical Parameter | Specification |
|---|---|
| Observation Size | Generally 400mm×250mm; covers testing needs of most aluminum foil samples. |
| Transmitted Light Illuminance | Usually 1000Lux; ensures pinholes on aluminum foil can be clearly observed. |
| Ambient Light Illuminance for Application | Generally between 20Lux and 50Lux; adapts to different testing environments. |
| Magnification Graduation Value | 0.1mm; enables precise measurement of pinhole sizes. |
| Objective Lens Magnification | Usually 10X×10X (100-fold magnification); makes pinhole details more visible. |
| Minimum Measuring Grid Value | 0.01mm; capable of detecting tiny pinholes. |
| External Dimensions | Generally 800mm (length) × 600mm (width) × 300mm (height); facilitates placement and movement. |
| Net Weight | Usually about 20kg; features a compact and stable structure. |
Accessoriess
Main unit, 100X magnifying glass, power cord, certificate of conformity, fuse
Test Procedures
1. Sample Preparation
Take 10 aluminum foil samples measuring 400mm × 250mm (or the roll width if the width is insufficient), ensuring the samples are free of creases or mechanical damage.
2. Testing Method
Place the samples on a pinhole inspection stage and observe the number and size of pinholes using transmitted light. The pass/fail criterion is: pinhole diameter > 0.3mm or a pinhole count exceeding the limit per unit area (usually 0.01m²) is considered unqualified.
3. Instrument Requirements
The testing device must be equipped with a standardized light source (30W fluorescent lamp), a high-transmittance glass backing, and a 400mm × 250mm observation area to ensure the repeatability of the test results.
在线联系供应商
Other supplier products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates Real-World Conditions: Allows testing under contro... |
 |
Foam Repeated Compression Tester | Foam repeated compression testing machine will accurately measure the thickness of the test piece, placed in the compression plate of the testing m... |
 |
Bending Tester STD- FB2 - A | The Pure Bending Tester analyzes hand movements-referred to as "bending"-performed by artisans and professionals when judging a fabric's texture. T... |
 |
Thermal cycle wet freezing testing machine | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclosu... |
 |
Particle Strength Tester | The Particle Strength Tester is a high-precision instrument designed to measure the mechanical strength of individual particles, granules, and cata... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
