Syringe needle flow tester
The Syringe Needle Flow Tester is designed to evaluate the flow characteristics of syringes by measuring the volume of liquid discharged over a specified time. It provides accurate and reproducible results for quality control, research, and development of syringes, anesthetic puncture kits, and pre-filled injection systems. The device integrates a test body, syringe fixture, flow meter, and control system for precise testing.
Application
This tester is suitable for a wide range of medical devices, including:
(1) Disposable anesthetic syringes – testing flow rate consistency for anesthesia delivery.
(2) Pre-filled syringes – ensuring accurate dosing and uniform liquid discharge.
(3) Standard hypodermic syringes – assessing flow characteristics for various liquid viscosities.
(4) Infusion needles – evaluating needle performance under different pressures.
(5) Catheter-mounted syringes – verifying flow rate for precise medical application.
(6) R&D and production line quality control – confirming syringe compliance with standards.
Standards
The instrument is designed to meet the following standards:
(1) YY 0321.1: Disposable anesthetic puncture kit (China)
(2) YYB: Stainless steel injection needle for pre-filled and sealed syringes (China)
Optional compliance with international standards:
(3) ISO 7886-1: Sterile hypodermic syringes – Part 1
(4) ISO 8537: Single-use sterile needles and syringes
Features
(1) Measures syringe flow rate accurately over a fixed time interval.
(2) Integrated control system for precise pressure and flow management.
(3) Supports different syringe sizes with customizable fixing fixtures.
(4) Real-time monitoring of test parameters, ensuring reliable results.
(5) Easy-to-use interface for rapid setup and operation.
(6) Compact design suitable for laboratory or production environments.
Parameters
| Parameter | Specification |
|---|---|
| Test pressure | 0 – 400 kPa |
| Pressure resolution | 0.1 kPa |
| Pressure accuracy | ±1% FS |
| Air source interface | 8 mm polyurethane pipe |
| Test interface | 6% Ruhr connector (customizable) |
| Host dimensions (L × W × H) | 325 × 420 × 170 mm |
Accessories
(1) Test body – 1 set
(2) Syringe fixing device – 1 set
(3) Flow meter – 1 set
(4) Control system – integrated
(5) Operation manual – 1 set
(6) Optional connectors and adapters for different syringe types
Test Procedures
(1) Secure the syringe in the fixing device according to its nominal size.
(2) Connect the air source and test interface.
(3) Set the test pressure and duration on the control system.
(4) Start the test; the device will measure the volume of liquid discharged over the specified time.
(5) Record the flow rate data and analyze results for compliance.
Maintenance Information
(1) Keep the device clean and free from liquid or dust ingress.
(2) Inspect the flow meter and syringe fixtures regularly to ensure accurate readings.
(3) Avoid exposing the device to excessive humidity, vibration, or temperature fluctuations.
(4) Calibrate pressure sensors periodically to maintain accuracy.
(5) Follow standard electrical safety guidelines during operation.
在线联系供应商
Other supplier products
 |
Xenon Test Chamber | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunlight spectrum, including ultraviolet, visible lig... |
 |
Medical Suture Line Diameter Tester | The Medical Suture Thread Diameter Tester is a specialized testing equipment used for measuring the diameter or linear diameter of medical suture t... |
 |
Ultraviolet Aging Testing Chamber | Equipment Description This test equipment is designed to simulate the sunlight and cause the damage of the sun's ultraviolet light, by exposing th... |
 |
Ball Rebound meter | Standard: DIN EN ISO 8307 ASTM D 3574 Main application scope and functions: This machine is designed and manufactured according to GB/T6670-97.... |
 |
Closed - Space Tester for Aerosol Sprays | Product Description Conforms to UN Recommendations on the Transportation of Dangerous Goods - Manual of Tests and Criteria 31.5 Confined Space Ign... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
