Syringe Needle Cone joint Performance Comprehensive Tester
Syringe Needle Cone joint Performance Comprehensive Tester - Other test instrument - standard
Product Information:
Syringe Needle Cone joint Performance Comprehensive Testerwith 5.7-inch (120 × 90) single-color LCD touch screen display. The keyboard selects the nominal capacity of the syringe. The axial force, torque, holding time, internal hydraulic pressure, separation force, and leakage rate are displayed during the test. The test result can be printed out by inbuilt printer.
Meet Standard:
GB/T 1962.1、GB/T 1962.2
Technical parameters:
Can measure the syringe connector liquid leakage, air leakage, overload, separation force, stress and assembly many indexs.
Axial force: 1N ~ 30N, error is not greater than ± 0.2N;
Internal pressure: 200kPa ~ 400kPa, error is not greater than ± 5kPa;
Separation force: 1N ~ 30N, the error is not greater than ± 0.2N;
Hold time: 1 ~ 60s, error is not greater than ± 1s, any setting;
Torque: 0.1N? M
Nominal capacity: 1mL ~ 60mL arbitrary choice.
Net weight: 20Kg Dimensions: 440 × 350 × 384 (mm)
Part list:
1. Host 1 set
2. Printing paper 1 roll
3. Fixture 1set
4. Weight 1 set
5. Operating Instruction
在线联系供应商
Other supplier products
 |
GMA Ultra-filtration Membrane Porometers | Standards: ASTM F316-2003, ASTM D6767-2002, ASTM E1294-1999, ISO 4003-1990, GB/T 14041.1-2007, HY/T 051-1999, HY/T 064-2002 Applications: ... |
 |
Mask Synthetic Blood Penetration Tester | Medical masks synthetic blood penetration tester is used to determine the resistance of medical protective masks to penetration by synthetic blood ... |
 |
Cigarette paper smoldering performance tester | Cigarette paper smoldering performance tester - Other test instrument - standard Product Introduction: Cigarette paper smoldering performance tes... |
 |
Steel wheel wear testing machine | Meet the standard: GB/T3810.7-2016 "Wear resistance test method for unglazed brick" ISO/DIS10545/6-94 "Unglazed brick resistance to deep wear tes... |
 |
Wet leakage current test system of photovoltaic module | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovol... |
Same products
 |
Falling Sand Abrasion Test machine | 卖方: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | 卖方: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | 卖方: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | 卖方: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
