Schopper folding machine for paper
Schopper folding machine for paper - Other test instrument - standard
Product Information:
Use and Scope of application:
1, the instrument is suitable for tensile strength greater than 1.33kn/m, thickness less than 0.25mm paper folding determination.
2, the instrument structure parameters and technical performance are in line with GB/T457-2008 "Paper folding resistance determination method" and other relevant standards.
Technical parameters:
1, the maximum measurement thickness :0.25mm
2, folded film thickness :0.5±0.05mm
3, sample load: initial tension :7.55±0.10N Maximum tension :9.81±0.10N
4, reciprocating folding rate :110±10 times /min
5, folding roller diameter :6mm
6, folding roller and folding roller spacing :0.30mm
7, folding roller spacing :0.5mm
8, the same group chuck distance :90±0.5mm
9, counter counting range :0-9999 times
10, power supply :220V±10%50Hz
在线联系供应商
Other supplier products
 |
Respirator Fit Tester | Hydrostatic Head Tester - Textile and Apparel - standard Applications: Overall Mask Leakage Test: Mask leakage is measured while the mask is ch... |
 |
Fully Automatic Closed Mouth Flash Point Tester | Meet the standard: ASTM D93 ISO 2719 IP 34 ASTM D7236 Product Introduction: The flash point is a critical parameter for classifying flammab... |
 |
Shoe bending Angle tester | Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clamped on the hard base, wit... |
 |
Voltage Drop Tester for Automotive Wire Connectors | Voltage Drop Tester for Automotive Wire Connectors - Other test instrument - standard Product Information: The voltage drop tester for automotive... |
 |
Mulfunctional Scratch Tester | Standards: GB/T 2918. GB/T 6151. GB/T 8424.3. PV3952. BMW GS97034-2. BMW GS97034-9. GMN 3943-2003.FLTM BN 108-13.STD1024-3113.GMW 14698-A，GMW 1468... |
Same products
 |
Falling Sand Abrasion Test machine | 卖方: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | 卖方: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | 卖方: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | 卖方: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
