Safety shoe voltage tester
Product Information:
The safety shoe voltage resistance tester is mainly used to test the voltage resistance of safety shoes under specified conditions, including the measurement of ground voltage, voltage resistance time and other parameters. Through the test of the equipment, the electrical insulation performance of the safety shoes can be effectively evaluated, so as to judge whether it meets the requirements of national standards. This is of great significance to the protection of workers' personal safety.
Meet the standard:
GB12011, ISO 8782-1, GB20991-2007, IS2.344:2004, ANSI-241 and CSA-Z195
Technical parameters:
Control system: PLC （Programmable logic controller） is usually used to realize automatic control and test process.
Input voltage: generally AC220V, in line with the requirements of conventional power supply.
Output voltage: can be customized according to test requirements, common output voltage including AC6KV, AC20KV, AC30KV and so on.
Capacity: Generally 0.5KVA, to ensure stable operation of the equipment during the test.
Test frequency/time: The test frequency is usually 60Hz, and the test time is generally 1 minute or set according to standard requirements.
Touch screen: 7-inch color touch screen, support English and Chinese switching, easy to operate and view the test results.
在线联系供应商
Other supplier products
 |
Particle Strength Tester | Standard ASTM D4179: Standard Test Method for Single-Pellet Pressure Resistance of Catalysts and Catalyst Carriers ASTM D6175: Standard Test Me... |
 |
Photovoltaic module outdoor exposure test system | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Safe... |
 |
Protective Clothing Against Acid and Alkali Tester BS EN 463-1995 ISO 6529-2013 | Standards: GB 24540-2009《protective clothing against liquid acids and alkalis 》Appendix D ISO 6529-2013 Protective clothing-protection against che... |
 |
Cupping Tester | Meet the standard: ISO 1520 ASTM E643 EN ISO 1520 DIN 50101 DIN 50102 Product Introduction: The cupping test provides valuable information... |
 |
Micro Controll Constant-Speed Friction Plate Tester | Main uses 1. microcomputer control fixed-speed friction tester is mainly used to measure the friction coefficient and wear rate of automobile brak... |
Same products
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | 卖方: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | 卖方: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | 卖方: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | 卖方: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
