Hexapod Tumbler test instrument
Product Information:
Hexapod tumbler tester, also known as carpet appearance assessment tester, is designed to determine the appearance maintenance ability of carpet. The tester is equipped with a cylinder and an improved hexapod drum cover. The tumbler is mounted on the free floor standing device, vibrated by electricity. Ribbed rolling device mounted in the center is driven by variable speed motor to spray soil. The hopper and rolling device is mounted inside of the hexapod drum. The soil is directly sprayed on the carpet specimen installed inside of the drum via the hopper. The cylinder, 2.3kg, 205mm length x 63mm width, runs freely on the carpet specimen inside the drum. The improved hexapod drum cover makes it possible that the device can be used together with the existing hexapod device.
Features
·Built-in cylinder
·Improved hexapod drum cover
·Good stability
·Quick test.
Working principle
·Use double sided tape to stick the carpet specimen on the elastic lining, and then fix them inside of the tumbler, which can be retrieved anytime. If in need, add bottom lining under the carpet.
·Tumbler adopts a reciprocating motion mechanism, in order to provide more real pile condition. The required number of revolution can be set in advance by a rotating counter. The 3.8 Kg tumbler has six polyurethane footholds (if there is damage to the six footholds, serious wear or service for two years, make replacement).
·2000 revolutions of the specimen takes about an hour. Take out the carpet for cleaning by vacuum cleaner as that in actual scenario. Change a new specimen for repetitive test, usually 6 tests and in total of 12000 revolutions.
Other supplier products
|
|
Protective Clothing Against Acid and Alkali Tester |
Protective Clothing Against Acid and Alkali Tester - Textile and Apparel - standard
Standards:
GB 24540-2009《protective clothing against liquid... |
|
|
Taber abrasion resistance tester |
Standards:
Applicable Standards ISO 9352, ISO 5470, ISO 7784, ASTM D1044, ASTM D3884, ASTM D4060, GB/T 5137.1, QB/T 2726, DIN 53109
Applica... |
|
|
G651 national standard shoe bending tester |
Product Introduction:
National standard shoe bending testing machine is specialized in testing finished shoes and soles, after a long time, fixed ... |
|
|
Taber oscillation and wear instrument ASTM F735 ARCA AR-C STP 5.2.5 |
Standards
ASTM F735. ARCA AR-C STP 5.2.5 (Bayer Wear Test)
Applications
Taber oscillation and wear instrumentis used to test the transparency of... |
|
|
Dental Implants Static Torsion Testing Machine |
Standard
ISO 13498: Specifies static torsion testing protocols for dental implants, including torque application rates, failure criteria, and da... |
供应产品
Same products
