Reciprocating Wear Tester
Standards
ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to evaluate the friction coefficient and anti - wear properties of lubricating oils. ISO Standards: Standards like ISO 12156 established by the International Organization for Standardization (ISO) are also applicable to these tests. National Standards: In China, the tests may need to comply with the GB/T series of national standards, which have detailed provisions on testing methods, conditions, data processing, etc. Industry Standards: Depending on specific application fields and testing requirements, certain industry - specific standards are also involved. These standards are developed according to the testing requirements for specific materials or application areas.
Research
Research the friction and wear properties of various materials, including metals, non - metals, and composite materials. Provide support for material improvement and optimization based on test data, and drive the research and development of new materials.
Applications
Evaluate the wear resistance of key mechanical components such as engine pistons, gears, and bearings. Predict their service life and performance in actual use, assist in optimizing mechanical designs, and enhance product reliability and durability.
Aerospace Field
Study the wear resistance of spacecraft materials, simulate friction conditions in extreme environments, assess the abrasion - resistance ability of materials, and ensure the reliability and safety of spacecraft.
Automotive Manufacturing Industry
Test the wear resistance of automotive components like brake pads, tires, and engine parts. Evaluate their wear - resistance and durability in practical use to improve the quality and performance of automotive products.
Applications in Other Industries
In industries such as coatings, plastics, decorative fabrics, automotive interiors, and tufted fabrics, detect the scratch - resistance and wear - resistance properties of materials, providing support for product quality control and performance enhancement.
Technical Parameters
The biggest test (kN) : 10
Test force measuring range: the maximum test force of 0.06% 100%
Test force relative error value: plus or minus 1%, under 400 n + / - 5 n
Test force long stay: of error of plus or minus 1% FN (per)
The friction measurement range (N) : 0-300
Single-stage infinitely variable speed system (r/min) : 200 ~ 3000
Spindle speed error (r/min) : 10 mm
The friction load sensor (N) : 50
The oil box of stroke (mm) : > 45
The spindle hole taper: 1:7
The heater temperature scope of work (℃) : at room temperature to 220
The temperature control range (℃) : 2 or less
Special standard ball diameter (12.7 mm:) phi
The spindle motor power (kW) : 2.2
Machine spindle control: time control speed (cycle) friction control
Machine appearance size (mm) : 1200 * 810 * 810
Testing machine quality (kg) : 850
在线联系供应商
Other supplier products
 |
MST Medical Compression Stocking Tester | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the compression performance, elasticity, and durabili... |
 |
Flammability test furnace for building materials | Product Introduction: Touch screen control building materials flammability test furnace adopts stainless steel box, is in the old JCK-2 products b... |
 |
Multi-Functional Scratch Tester | Multi-Functional Scratch Testeris suitable for a variety of automotive interior materials, such as plastic, rubber, leather, fabric, coating materi... |
 |
Jis rubbing fastness tester | JIS rubbing colour fastness tester is a standard testing machine, based on the friction tester type II (Gakushin type) specified in the "Test Metho... |
 |
Spray Rating Tester - Test Equipment | Standards: ISO 4920. BS EN 24920. BS 3702. GB/T 4745. AATCC 22. M&S P23. NEXT 23 Applications: Spray Rating Tester is used to determine the ... |
Same products
 |
Falling Sand Abrasion Test machine | 卖方: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | 卖方: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | 卖方: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | 卖方: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
