Automobile Seat Frame Strength Test Bench
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Email：serving@qinsun-lab。com
1. Product Overview
The Automobile Seat Frame Strength Test Bench is designed to evaluate the structural strength and durability of automotive seat frames, seat fixers, and headrests under various load conditions. It simulates real-world forces, including forward, backward, and torsional loads, to ensure seat components comply with international and national safety standards. The test bench is widely used by automotive OEMs, seat manufacturers, and testing laboratories for performance verification, quality control, and R&D purposes.
2. Product Features
High loading capacity to simulate extreme conditions, including high-magnitude static and dynamic loads.
Supports multiple loading methods such as horizontal forward, horizontal backward, and torsion to cover a variety of test scenarios.
Computer-controlled servo system ensures precise loading and measurement.
Real-time data acquisition and processing with automatic test report generation.
Configurable number of test cycles for durability and fatigue evaluation.
Durable mechanical structure designed for stable long-term operation.
Safety features including emergency stop, overload protection, and compliance with electrical safety standards.
3. Applicable Standards
GB 15083-2006 – Automotive seats, seat fixers, and headrest strength requirements and tests.
GB 13057-2003 – Strength of passenger car seats and vehicle fasteners.
QC/T 740-2005 – Passenger car seat assembly.
QC/T 633-200X – Bus seat requirements.
JT/T 460-2001 – Passenger car seat back angle adjuster technical requirements.
FMVSS 207 – Federal Motor Vehicle Safety Standard, strength requirements for seat backs and adjustment devices.
ECE R17 – ECE regulation on the strength of car seats and seat belt anchors.
4. Technical Parameters
| Parameter | Specification |
|---|---|
| Input Voltage | Three-phase AC 380±10%, Single-phase AC 220±10% |
| Force Sensor Accuracy | ±1% FS |
| Measuring Range | 0–2000 N |
| Test Frequency | 5–30 cycles/min (adjustable) |
| Floor Area | 3500 × 3500 × 2500 mm |
| Control Mode | Computer-controlled servo system |
| Data Acquisition | Real-time recording and automatic test report generation |
在线联系供应商
Other supplier products
 |
Schopper Abrasion Tester | The Schopper abrasion tester is a precision device specifically designed to evaluate the abrasion resistance of fabrics. By simulating friction sce... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com A Light Fastness Tester, or Xenon Tester, Accelerated Ageing Chamber, is used for ... |
 |
Leather Seam Fatigue Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standards ISO 5402: Leather physical testing – Flex tester method for adh... |
 |
Taber Abrasion Tester (Double-Head) | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standards DIN Standards: DIN 53754 (plastics), DIN 53109 (paper/board), DIN 52347... |
 |
Fiber Thermal Shrinkage Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Fiber Thermal Shrinkage Tester is a digital instrument designed for evaluating... |
Same products
 |
Falling Sand Abrasion Test machine | 卖方: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | 卖方: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | 卖方: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | 卖方: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
