Impact strength tester for car seat launching headrest
Get a quote：
Whats/App: +86 185 0176 3615
Web: qinsun-lab.com
Email: serving@qinsun-lab。com
Main parameters:
Impact speed:The impact speed of the tester is usually between 25 and 30km/h, which is a key parameter to simulate vehicle collision or deceleration. The specific speed value should be determined according to the test criteria and the type of seat.
Impact head type:Impact head type is a component that simulates the shape and quality of the passenger head, and its parameters such as diameter and equivalent mass should meet the requirements of relevant standards. The common impact head type has a diameter of 165mm and an equivalent mass of about 6.8kg.
Measurement accuracy:The measurement accuracy of the tester includes impact velocity measurement accuracy, acceleration measurement accuracy, etc. These precision parameters determine the accuracy and reliability of the test results. Generally speaking, the impact velocity measurement accuracy should be about ±1%, and the acceleration measurement accuracy should be about ±3%.
Adjustment range:The impact arm of the tester usually has a large adjustment range in the Z direction to adapt to different seat types and test needs. At the same time, the Angle of the impact arm can also be adjusted to simulate the collision situation at different angles.
Data acquisition and processing:The tester should be equipped with a high-speed data acquisition system, which can record various data in the test process in real time, such as impact speed, acceleration, deceleration, etc. At the same time, the data should be able to be subsequent processed and analyzed to produce accurate test results.
Safety protection:The tester should have perfect safety protection measures, such as safety protection net, emergency stop button, etc., to ensure the safety and reliability of the test process.
Features：
Pneumatic launch system with velocity control
3D high-speed impact analysis (100.000 fps)
Biofidelic neck injury criteria calculation
Automatic rebound prevention mechanism
Crash pulse reconstruction capability
Standards：
FMVSS 202a (Head Restraints)
ECE R17 (Vehicle Seat Strength)
ISO 17373 (Road vehicles - Head restraints)
IIHS Head Restraint Rating Protocol
Euro NCAP Whiplash Assessment
Parameters：
| Parameter | Specification |
|---|---|
| Impact Velocity | 5-24 km/h (1.4-6.7 m/s) |
| Max Impact Energy | 500J (±2%) |
| Acceleration Range | 0-100g (±1.5%) |
| Test Mass | 7kg/18kg/24.5kg (Selectable) |
| Measurement Frequency | 100kHz (16-bit DAQ) |
| Time Resolution | 10μs |
| Power Requirements | 3PH 480VAC 60Hz |
在线联系供应商
Other supplier products
 |
Fogging Tester | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Standards DIN 75201: Automotive trim material fogging resistance. ISO 6452: Co... |
 |
Cleanable Filter Media Test System | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Application This system is used for: Cleanable Filter Media: Testing in accordan... |
 |
Enamel Boiling Water Resistance Tester ISO ASTM | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Enamel Boiling Water Resistance Tester is designed to evaluate the chemical at... |
 |
Vehicle-Level High/Low Temperature and Humidity Test Chamber | Get a quote： Web: qinsun-lab.com Email：serving@qinsun-lab。com TheVehicle-Level High/Low Temperature and Humidity Test Chamberis a large-scale en... |
 |
Seat Belt System Testing Machine FMVSS 209 | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Automotive Seat, Mounting Device and Seat Belt System Testing Machine is desig... |
Same products
 |
Battery Diaphragm Gas Permeability Tester ISO | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Battery Diaphragm Gas Permea... |
 |
Torsion Testing Tester ASTM, JIS, and DIN | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Universal Torsion Testing Ma... |
 |
Wire Torsion and Winding Tester ASTM and JIS | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Wire Torsion and Winding Tes... |
 |
Metal Wire Repeated Bending Tester ISO/DIS 7801 | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending ... |
 |
Metal Wire Wrap Tester ISO 4101 | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Wrap Tester is de... |
