Pre-Vacuum Autoclave Desktop Autoclave
Pre-Vacuum autoclave desktop Autoclave WR-16B-MInstructions：1. Please read the manual carefully before operation.2. Put sterilizers on horizontal worktable and raise the front two supporting stands slightly.3. Be sure to use distilled water in order to prolong the life of sterilizers.4. Clean the water tanks and water filter regularly.5. Do not move the sterilizer during the process of work.6. All the medical equipment,Website:, blankets, clothing etc. which contact pathogenic microorganisms must be sterilized by chemical disinfectant first.7. The package or container for disinfection items must be appropriate, and is recommended to use double wrapped white cotton with good steam penetration.8. Try to put the same kind of instrument in the same sterilizer flatly, leave aperture, make sure steam can penetrate easily.9. Make sure the machine in good condition, especially the safe valve.10.Do not open the door until the pressure fall down to "0" bar
Other supplier products
|
|
|
LCD digital automatic laboratory used Autoclave sterilization WR-ASpecifications:Capacity: 23L Sterilizing temperature: 121℃,Website:, 134℃ Special... |
|
|
|
18 Liter class B medical tabletop autoclaveWR-18B-BPRODUCT CHARACTER：1. Based on the new class B of international prEN13060,Website:, have 3 pulsat... |
|
|
|
Speed moist heat sterilizer dental autoclaveWR-18B-B(-P with printer)
Voltage AC 220V±10%
Frequency 50/60 HZ
Wire plug GB 3 cores/EN... |
|
|
|
High pressure steam dentacal Autoclave sterilizer with printer WR-23B-A(-P with printer)1.Fully compliance to EN13060 B standard,Website: times pul... |
|
|
|
Water distiller Technical Specifications Voltage220VFrequency50HzWire plugGB 3 cores/EN 3 coresPower750WDistiller water1.2L/HCapacity4LProduct siz... |
供应产品
Same products
