Ultrasonic Spray Pyrolysis
R&D-scale Ultrasonic Spray PyrolysisSystem
Spray pyrolysissystem for fine powder preparation in R&D scale
Ultrasonic atomization technology atomizes precursor into submicron droplets
Ultrafine powder in nano scale with uniform size can be prepared
Unique ultra-fine powder collection system, which can efficiently collect nano particles
Precision control of carrier gas flow
Especially suitable for the preparation of metal oxide powder
The spray pyrolysis process can be simply described as a series of physicochemical processes, such as mixing each metal salt into a precursor solution according to the stoichiometric ratio required for the preparation of composite powder, atomizing it by the atomizer, and then bringing it into the high-temperature reaction furnace by the carrier gas. In the reaction furnace, a series of physical and chemical processes, such as solvent evaporation, solute precipitation to form solid particles, particle drying, particle thermal decomposition, sintering and molding, are completed instantaneously, and finally ultrafine powder is formed. Using ultrasonic atomization technology, the solution can be uniformly atomized into micron or even nanometer liquid droplets, and the atomized droplets are sent to the high-temperature reaction furnace through carrier gas for pyrolysis. Ultrasonic spray pyrolysis can produce more uniform and fine powder particles than conventional pyrolysis.
With nearly 40 years of experience in ultrasonic atomization technology, Siansonic can provide customers with R&D, pilot-scale production spray pyrolysis system, including ultrasonic atomization device, high-temperature tube furnace, nano powder collection system, precursor liquid supply system, carrier gas flow control, etc.
Features of Siansonic R&D scale ultrasonic spray pyrolysis system:
Nano aerosol generator: NG series high frequency ultrasonic spray system
Digital megasonic generator: driving and controlling nano aerosol generator
High temperature tube furnace: the standard configuration is 1200 ° C, and the heating temperature zone length is 400mm
Nano particle collector: using high-voltage electrostatic field to collect ultra-fine particles, the minimum collectable particle is 0.1 nm, and the collection efficiency is more than 95%.
The precise pressure regulator realizes the precise control of carrier gas flow: the maximum pressure is 0.1MPa
Precision gas flowmeter and precision barometer: flow rate < 50L / min
Vacuum pump and compressed air pump: provide air source and atmosphere protection
Automatic liquid supply system: double pump head micro peristaltic pump to reduce pulsation
For more information about ultrasonic atomization, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Ultrasonic Spray Nozzles | Ultrasonic nozzles, also known as ultrasonic spray nozzle or ultrasonic spray gun, is an ultrasonic atomization device based on the principle of La... |
 |
Industrial Ultrasonic Coating System | Coating uniformity: > 95% Non-clogging ultrasonic nozzle technology reduces maintenance cost and down-time Continuous liquid delivery in 2... |
 |
Ultrasonic Air Bubble Detector Sensor | Siansonic unique non-invasive ultrasonic air bubble detectors and ultrasonic air bubble sensors are widely used in the detection of air bubbles in ... |
 |
Ultrasonic Spray Drying Nozzle | Ultrasonic spray drying nozzle is based on ultrasonic atomization technology Ultrasonic dryingnozzle for uniform and small atomized droplets ... |
 |
Siansonic Ultrasonic Atomizer Transducers | Ultrasonic atomizer transducer is the core component of single humidifier piezo type ultrasonic atomization. As one of the earliest ultrasonic pie... |
Same products
 |
10L Digital Ultrasonic Cleaner | 卖方: RedCrown Ultrasonic Industrial Ltd | Model NO.: ZX-040S ◼️ 10L Ultrasonic Cleaner with Heater ◼️ 304 stainless steel tank | 40KHz,... |
 |
1.3L Digital Ultrasonic Cleaner with LCD, Heater and Timer | 卖方: RedCrown Ultrasonic Industrial Ltd | Model NO.: ZX-009S Multipurpose commercial ultrasonic cleaner adapts to diverse professional nee... |
 |
1.3L laboratory ultrasonic cleaner | 卖方: RedCrown Ultrasonic Industrial Ltd | Model NO.: JP-009 Manual Ultrasonic Cleaner is designed for high-efficiency cleaning in professi... |
 |
3 Tank Ultrasonic Cleaning System | 卖方: RedCrown Ultrasonic Industrial Ltd | Model NO.: JP-30 Three tank industrail ultrasonic cleaner the typical function is Cleaning +Ri... |
 |
Dual Tank Ultrasonic Cleaning Machine | 卖方: RedCrown Ultrasonic Industrial Ltd | Model NO.: JP-20 Dual Tank Ultrasonic Cleaner ,the first tank is equipped with a filtration sy... |
