PHT-F-18W-A LED Floodlight
Technical Parameters:
*Input Voltage: AC85-265V
*LED Mode: BridgeLux/ Epistar
*LED Number: 18 PCS
*Power Consumption: 18W±10%
*Luminous Flux: ≥4000 Lm
*CRI: ≥80
*PF: ≥0.9
*Power supply Efficiency: ≥88%
*CCT: 3000-10000K optional
*Beam Angle: 60°/90°/120°
*Life Span: ≥50000 hrs
*Protection Level: IP65
*Material: Diecasting alloy
A. Lighting ground protection line must be grounded to prevent lightning strikes.
B. And lamps terminals must be good electrical adhesive tape completely wrapped, to prevent rain water from the cable head into the lamp body.
C. To ensure that light outlet surface and the lamp body bracket on the same side, and towards the ground.
D. Lamps cast light angle tuned, make sure you fully tighten the screw bracket to prevent the lights off.
E. Installation and maintenance, disconnect the input power
Feature:
*Die-casting aluminum casing and high intensity toughened glass cover
* With Lens, light looks better
* High efficiency and power factor LED driver
*Wide radiation angle, huge lighting area
* Start without delay and flicker free
*Good color rendering
*Warm and cold color temperature are available
*High shock & vibration resistant
*Ideal heat dissipation design
*No UV & IR, No Blinking and No Mercury & Lead free
* Energy saving system, saving 50% energy than the conventional Metal halide lamp, Sodium Light or HPS light
Application:
can be used in indoor and outdoor places, such as in factories, stadiums, wharfs, advertisement boards, parks, and tunnel,etc
Other supplier products
|
|
PHT-F-48W LED Floodlight |
Technical Parameters:
*Input Voltage: AC85-265V
*LED Mode: 48PCS 1W BridgeLux LED
*With Silical Gel
*60W MeanWell Power suppy
*Power Consumption:... |
|
|
154LED Floodlight |
Technical Parameters:
*Input Voltage: AC85-265V
*LED Mode: CREE( BridgeLux/ Epistar for option)
*LED Number: 154PCS
*185W MeanWell power supply... |
|
|
PHT-W-24W-100 100cm LED Wallwasher light |
Specification:
*Input Voltage: AC 85~265V
*LED Chip: BridgeLux/Epistar
*LED Qty. 24PCS
*Product length:100cm
*Color for Choice: cool white, warm w... |
|
|
PHT-F-10W-S0S LED Floodlight |
Technical Parameters:
*New function: Signal Red and SOS Blinking
*with remote controller
*Input Voltage: AC85-265V
*LED Mode: 10W lamp Integrated... |
|
|
PHT-F-18W-A LED Floodlight |
Technical Parameters:
*Input Voltage: AC85-265V
*LED Mode: BridgeLux/ Epistar
*LED Number: 18 PCS
*Power Consumption: 18W±10%
*Luminous Flux: ≥40... |
供应产品
Same products
