T-8000A Full Color Led Controller
T-8000A-TTLystem features1. 32—256 Gray level,Website: software Gamma correction.2. Support the rules and special-shaped handle.3. Eight--port output,every port can support 512-1024 pixels.4. Off-line (SD Card) control, can be multiple controllers used in combination, play back content stored in the SD card.5.T-8000A-TTL store a maximum of 16 programs,copy multiple files to the SD card in order,after formatting the SD card as "FAT" format.6. The program must be named in orders ,just as ：00_1.led, 01_1.led, 02_1.led.7. Compatible with single and dual ICs, if you control a single line IC LED lights, without being connected to the CLK line.8. New T-8000A-TTL have a screen, the controller can be encrypted to limit the times of use.NOTE：1.When T-8000A--TTL controller control less than 512 lamps the frame rate can reach 30fps. When T-8000A-TTL controls more than 512 lamps and less than 1024 lamps the frame rate will slow down automatically.2.Support chips：Chip type Software code& Controller type Pixels/(MAX) Note LPD6803,D705,1101,6909, 6912T LPD8806,LPD8809T TM1803,TM1804,TM1809,TM1812T-8000-TM8192TM1804 and TM1809 are divided into high speed and low speedTM1903,TM1904,TM1909,TM1912T-8000-TM198192 UCS6909,UCS6912,UCS7009,UCS5903T-8000-UCS-328192 UCS1903,UCS1909,UCS1912T-8000-UCS-2568192divided into high speed and low speedUCS3903T-8000-UCS-10248192 DMX512T-8000-DMX1360/4096Compatible with standard DMX512WS2801,WS2803T-8000-WS8192 WS2811T-8000-WS28118192divided into high speed and low speedDS189T-8000-DS1898192 TLS3001,TLS3002,TLS3008T-8000-TLS____ P9813T-8000-P98138192 SM16715T-8000-SM167158192divided into high speed and low speedSM16716T-8000-SM167168192 BS0901,BS0902T BS0815T.The meaning of flagButton Meaning SET Save your adjust MODE Switch effect file SPEED+ Turn up speedPress the speed adjustment button the file will in turn play. SPEED- Turn down DC 5VDC 5V POWERPower light ERRORError indicator SD CARDSD card slotCLK Clock line DAT Data line GND Ground wire NOTE：For the TTL(SPI) signal, the controller signal ground must connect to the LED ground wire directly.4. Mode of connection6.File saving： Rules for naming files（Use of multiple controllers at the same time）：The name of the file on the first controller
"00_1.led" ---------the first effect file
"01_1.led" ---------the second effect file
"02_1.led" ---------the third effect file
……
"15_1.led" ---------the fifteenth effect file The name of the file on the second controller：
"00_1.led" ---------the first effect file
"01_1.led" ---------the second effect file
"02_1.led" ---------the third effect file
……
"15_1.led" ---------the fifteenth effect file
………For example 7. Specific parameters: Memory card： type：SD card（suggest using high-speed SD card） Capacity：128MB—2GB Format：FAT Store file Format：*.led Physical parameters：
Working temperature ：-30℃ —85℃
Working voltage：DC5V Working power：3W Size：L200mm×W170mm×H50mm Weight：1.5KG Signal port：3pin connect portNOTE：Before copy files to SD card ,The SD card must be formatted as FAT format.
Other supplier products
|
|
|
First ,Website:, the characteristics of T-4000 system 1, 32-256 level grayscale controls, Gamma correction software.
LedEdit 2, combined with v... |
|
|
|
Product Feature
1.ADS-IC1048 is combined with a aluminium shell and PCB board,Website:, also 4 spell line with blue,green,yellow,red color.with ... |
|
|
|
Product Feature
1. ADS-IC6045 is combined with the PC (cold-resistant,Website: to UV) shell and PCB board, also 4 spell line with blue,white,red... |
|
|
|
Product Feature
1. ADS-IC12RGBis combined with the PC (cold-resistant,Website: to UV) shell and PCB board, also 3 or 4 spell line with blue,whit... |
|
|
|
Product Feature
1. ADS-10060WS2812B flexible strip is combined with PCB board(white,Website:, black) and 3pins plug(red, green, white)connection... |
供应产品
Same products
