Vibration Finishing Machine, Buffing Machine For Wood Parts
Vibration finishing machineSpecificationsHigh quality vibratory finishing machine from China.Low working cost and low priceCE certificated vibrator machine ..1. Structure:Vibration finishing machine is composed of inertial vibrator,Website:, vessel, electrical cabinet and basement.Inertial vibrator: This is the vibrating source of the machine, it is composed Of vibratory motor, springs and eccentric blocks.Vessel: The vessel is welded of annular steel plate. It is lined with high quality wearable Polyurethane, to weaken the noise and the bump of work pieces on vessel.Electrical cabinet: Operate the machine by buttons on the control panel.Basement: It is weld of steel.2. Function:Vibration finishing machines are suitable for deburring, descaling, edge radiusing, polishing, surface improvement, pre plating finishing all types of components including fully machined parts in metals& plastics.3. Working Principle:The Vibration finishing machine for Metal Working has a ring chamber to hold abrasives and work pieces. When the machine is working, it makes three-D high frequency vibration. The grinding stones and the work pieces are rolling spirally forward and they are grinding each other during the rolling. This makes the work pieces de-burred, chamfered, polished and clean. To replace the traditional cloth-wheel polishing, the Vibratory Finishing Machine for Metal Working can save a lot of spending on manpower, and lower the cost of production. It can also be matched up with mass production, improve and stabilize the quality of the products.MODEcapacitymotorelectricitymotor speedPU lining thicknesssize(LXWXH)weight(L)(KW)(V/HZ)(r/min)(mm)(mm)(kg)GSJS-1501502.2380/X1050X900400GSJS/X1180X920440GSJS-3003003.7380/X1330X1000560GSJS-4004003.7380/X1350X1050800GSJS-6006005.5380/X1800X14001500GSJS/X2100X14502000
Other supplier products
|
|
|
Vibratory Automatic Polishing line is designed with PLC control for all operation steps,Website:, including vibratory finishing, water cleaning &... |
|
|
|
Steel Satellite polishing mediasteel media are used for burnishing processes. They can give an extremely high polished surfaces to most metal comp... |
|
|
|
ceramic polishing stone / chips in angle cut cylinder shape We produce all kinds of mass finishing media chips,Website:, ceramic media for fine pol... |
|
|
|
Double Rotating barrel polishing machine is used for polishing the burr and rust of undersized hardware parts,Website:, standardized parts and comp... |
|
|
|
High density Porcelain polishing media cylinder shape for fine FinishingMain of Composition: Aluminum oxide,Website:, Silicon oxide Effect: Is used... |
供应产品
Same products
