JH21 C Frame Pneumatic Press
JH21 Series pneumatic press machine adopted Japanese technology wet clutch is featured of stable working performance, high production efficiency, low noise, and less maintenance cost. Equipped with Japan SHOWA hydraulic overload protection pump ensuring longer service life. Its the most practical and mature small size press machine in the stamping field in recent years. Highly recommended for production of metal pieces.
World Press has invested huge amount for the most advanced production equipment from all over the world. including 12 sets of Italy PAMA CNC boring and milling machine, German Gleason grinding machine, German Liebherr gear hobber, Japan TOSHIBA CNC machining center, etc.
With powerful productivity and excellent production equipment, more than 85% mechanical parts are self-produced by World Press for JH21 Series C type press machine.
From structure buidling to final assembling, JH21 is followed in the highest Japanese JIS1 standard. Compact structure and high-graded configuration ensure reliable working performance and long service life.
FEATURES:
Steel welded body, tempering treatment or VSR(Vibratory Stress Relief), high rigidity, accuracy and stability.
Pneumatic dual balance cylinders, which balance the slide and punch weight to reduce noise and impact.
The crankshaft undergoes gringding treatment after high frequency quenching.
Lengthened six-face rectangle guide with a surface of bronze plate.
Vertical located crankshaft, compact structure.
PLC control and imported safety duplex valve.
Wet type combined multi discs friction clutch and brake.
Hydraulic onerload protected.
在线联系供应商
Other supplier products
 |
Multifunctional Closed stamping hydraulic press series | 1.Product description Multifunctional Closed stamping hydraulic press mainly used for metal thick and thin sheet drawing, blanking, flanging, bendi... |
 |
General C typeSingle column hydraulic press | Product description Single-column hydraulic press is a multifunctional small and medium-sized hydraulic press. This series of C-type single-column... |
 |
Double Action Hydraulic Stamping Press | Suitable for all deep drawing and shallow drawi ng processes f also for ben ding, flangi ng, blanki ng processes, especially for the following fiel... |
 |
JS31 Straight Side Single Crank Press | FEATURES: With high accuracy, rigidity and strength, suitable for punching, blanking, and shallow pull extension and other processing. Rigid inte... |
 |
Hydralic Press Machine for bearing parts assembly | Hydralic Press Machine for bearing parts assembly |
Same products
 |
Button sewing machine JM-373 | 卖方: Zhejiang Huaqi Information Technology Co., LTD | FeaturesIt is mainly used for sewing flat buttons with two holes or four holes. If attached, it c... |
 |
YZH固定式碎石机械臂系统 | 卖方: 山东伊润基础工程有限公司 | 对于固定应用，我们提供高级电源模块。该装置配备有电动机、液压泵和内置过滤器的油箱。对于我们的机器，我们提供手动和远程转向系统。标准设备的特点是手动转向，比例阀通常安装在固定式液压机械手的底座上。... |
 |
铸造锡基轴承合金 | 卖方: 河南桦创金属材料贸易有限公司 | 铸造锡基轴承合金 铸造轴承合金分为锡基、铅基轴承合金。虽然选用于滑动轴承轴瓦（轴套）的轴承材料有粉末冶金、非金属材料和金属材料等，但工业中常选用的还是非铁金属的铸造轴承合金，习惯称为铸造轴承合金... |
 |
固定式机械臂 | 卖方: 山东伊润基础工程有限公司 | 为什么从山东元正行机械设备有限公司购买固定式机械臂。？拥有超过20年的专业生产经验。2.快速高效的售后服务。3.丰富的现场工作经验。4.专业且富有创造力的研发团队。5.中国价格低廉。6.中国的快... |
 |
贵州中钻T45 T51 螺纹钻头 | 卖方: 844239 | SINODRILLS Threaded Button Bits With the top quality of alloy steels imported from USA and the b... |
