宽带砂光机
MODEL SRAP 1300-2
WORKING WIDTH 40-1300mm
WORKING THICKNESS 2.5-100mm
WORKING LENGTH ≥ 630mm
1# ABRASIVE BELT SPEED 20m/s
2# ABRASIVE BELT SPEED 20m/s
3# ABRASIVE BELT SPEED 18m/s
MATERIAL FEEDING SPEED 6-30m/min
ABRASIVE BELT SIZE(WIDTHx PERIMETER) 1330x2200mm
POWER 94.12 kw
WORKING AIR PRESSURE 0.55MPa
DUST SUCKING 9500m 3 /h
DUST SUCKING SPEED 25-30m/s
OVERALL SIZE(LxWxH) 2625x2680x2130mm
NET WEIGHT 4000kg
在线联系供应商
Other supplier products
 |
刨花机 | Model 9BH-420 9BH-600 9BH-800 Output（kg/h） 400 800 1500 Inlet size（mm） 160*80 200*120 230*230 Knife number 4 4 8 The knife length（mm） 90 150 ... |
 |
预压机 | Model BY814×8/4-IIz Nominal Gross Pressure 4000 KN Direction of Feeding Plate Horizontal Opening 1600mm Dimension of Workingbench 2700&... |
 |
数控芯板砂光机 | MODEL MM369 Max.sanding width 920mm Max.sanding depth 100mm Max.removal 0.4mm Table size 940x870mm Drum speed 1450r/min Feeding s... |
 |
液压扒皮找圆机 | Model HPD1400 Length of peeler log 1400mm Diameter of peeler log φ320mm Thickness of veneer peeler 1-8mm LINEAR SPEED of host machine 45m/m... |
 |
数控无卡轴旋切机 | Model BQS1814C/2.8 Length of the wood 1300mm Max. diameter of the wood Φ280mm Diameter of Left wood Φ28mm Thickness of Veneer 0.5－3.0mm... |
Same products
 |
SHJ Series Twin Screw Extruder | 卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd. | The SHJ Series Twin Screw Extruder() represents a remarkable evolutionary step in the field of ex... |
 |
Underwater Pelletizer | 卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd. | The Underwater Pelletizer(), a technological marvel in the polymer processing sector, has redefin... |
 |
Button sewing machine JM-373 | 卖方: Zhejiang Huaqi Information Technology Co., LTD | FeaturesIt is mainly used for sewing flat buttons with two holes or four holes. If attached, it c... |
 |
YZH固定式碎石机械臂系统 | 卖方: 山东伊润基础工程有限公司 | 对于固定应用，我们提供高级电源模块。该装置配备有电动机、液压泵和内置过滤器的油箱。对于我们的机器，我们提供手动和远程转向系统。标准设备的特点是手动转向，比例阀通常安装在固定式液压机械手的底座上。... |
 |
铸造锡基轴承合金 | 卖方: 河南桦创金属材料贸易有限公司 | 铸造锡基轴承合金 铸造轴承合金分为锡基、铅基轴承合金。虽然选用于滑动轴承轴瓦（轴套）的轴承材料有粉末冶金、非金属材料和金属材料等，但工业中常选用的还是非铁金属的铸造轴承合金，习惯称为铸造轴承合金... |
