JCUT-90150C CNC Router
1.X,Y,Z three-axis all the imported linear square orbit .
2.X,Y,Z three-axis all have the waterproof, dustproof system
3.Water cooling constant torque spindle with the imported with the imported bearing, high power, low tone
4. Inverter with high-quality with stable output signals
5.Adopt double drivers to drive y axis, motivity is more stronger
6.Whole seamless steel structure,can load weight up to 1000kg
7. Adopt advanced CNC system , configured with practical and easily –learned software , can conveniently check the moving path of tool, and adjust the processing depth of Z axis and the speed of motor.
8,Adopt impoeted ballscrew
9,Cast iron structure, can load weight up to 200-300kg/㎡
This series of models mainly used for lighter weight of the tile,bluestone ,marble,granite,white marble,sandstone,such as a stone sculpture proccessing,category carved glass-cutting and engraving melting material.
Performance Features:
1.Three axises adopt import linear orbit, two line sliding track,heavy loading, stable working, high precision, long lifetime .
2.Whole seamless weld steel structure, not easy to distort , the table back lining is armor plate, good rigidity, the machine can bear 1MT weight at least.
3.Constant power spindle and motor,hightly cutting capability ,high efficiency.
4.Well compatibility, compatible sofetware CAD/CAM, such as Type 3, Artcam,Castmate,Artcam,Coredraw.
5.Double direction cutters cooling system can prolong the lifetime of using.
6.High flexility, uneasy distorted cable and imported electronic components guarantee the stablitity of operating the machines.
Parameters:
JCUT MODEL
JCUT-90150C CNC Router
Working Area (X*Y*Z)
900X1500X150mm(35.4X59X 5.9inch)
Table size
1050x1800mm
Processing accuracy
0.03mm
Repositioning accuracy
0.02mm
Spindle
2.2KW variable speed , water-cooled
Spindle rotating speed
0-24000rpm/min
Max Moving Speed
7000mm/min
Working speed
0-4000mm/min
Driving mode
Ballscrew
Voltage
AC220V/50Hz
Max. Power consumption
2.9KW
Feeding Height
150mm
Drive motor
Stepper
Command
G.code , mmg , plt , uoo,HPGL
Compatible Software
Type3, Artcut, ArtCAM, masterCAM software
Certificate
CE,FDA
Pack dimensions
1500mm X 2050mm X 1700mm wooden trunk
Net weight
450KG
在线联系供应商
Other supplier products
 |
JCUT-1836AV CNC Router | This machine is widely used in woodworking, carving, cutting, engraving, work materials are wood, MDF, aluminum panels, ABS,acrylic, PVC, a variety... |
 |
JCUT- 5060 PCB ROUTER | The most boring ting to do is to make the PCB. Though now most people give the boring affairs to the PCB factory, yet it is indeed too long to wait... |
 |
Mini PCB Machine JCUT-3030 | 1.CNC advertising models for the table, working reposeful, accurate models than models with fixed gantry high accuracy. 2.X axis adopts imported po... |
 |
CNC Multi-purpose Engraving and Cutting Machine JCUT-1218 | This machine is widely used in woodworking, carving, cutting, engraving, work materials are wood, MDF, aluminum panels, ABS,acrylic, PVC, a variety... |
|
|
JCUT-90150C CNC Router | 1.X,Y,Z three-axis all the imported linear square orbit . 2.X,Y,Z three-axis all have the waterproof, dustproof system 3.Water cooling constant t... |
Same products
 |
SHJ Series Twin Screw Extruder | 卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd. | The SHJ Series Twin Screw Extruder() represents a remarkable evolutionary step in the field of ex... |
 |
Underwater Pelletizer | 卖方: Nanjing ChNanjing Chuanqi intelligent Equipment Co., Ltd.uanqi intelligent Equipment Co., Ltd. | The Underwater Pelletizer(), a technological marvel in the polymer processing sector, has redefin... |
 |
Button sewing machine JM-373 | 卖方: Zhejiang Huaqi Information Technology Co., LTD | FeaturesIt is mainly used for sewing flat buttons with two holes or four holes. If attached, it c... |
 |
YZH固定式碎石机械臂系统 | 卖方: 山东伊润基础工程有限公司 | 对于固定应用，我们提供高级电源模块。该装置配备有电动机、液压泵和内置过滤器的油箱。对于我们的机器，我们提供手动和远程转向系统。标准设备的特点是手动转向，比例阀通常安装在固定式液压机械手的底座上。... |
 |
铸造锡基轴承合金 | 卖方: 河南桦创金属材料贸易有限公司 | 铸造锡基轴承合金 铸造轴承合金分为锡基、铅基轴承合金。虽然选用于滑动轴承轴瓦（轴套）的轴承材料有粉末冶金、非金属材料和金属材料等，但工业中常选用的还是非铁金属的铸造轴承合金，习惯称为铸造轴承合金... |
